ZYGI
|
dwolek,
So just to be clear, run a set of wires (+ and -) from either speaker to the speaker level input on the sub.
Yes, but you should have two sets of speaker level inputs, use both of them. One for each channel.
You need not connect the speaker level outputs to anything, they are there for your convenience. Its alway better to go direct to the speakers (HDT's) than to go through the sub amp. If the amp is closer to the sub than the speakers are, wire it from the speaker terminals on the amp, if the speakers are closer, tap off the back of the speakers.
zygi
|