Forums - Need some dimensions

Welcome, Guest. Please Login or Register

04/18/24 at 02:03:35

Forums › OLDER DECWARE GEAR SUPPORT › TORII MK III

‹ Previous topic | Next topic ›

Pages: 1

Need some dimensions (Read 3534 times)

Donnie

Seasoned Member

Why does it hurt
when I pee?

Posts: 2193

Need some dimensions
03/13/11 at 02:20:49

Can anyone please tell me what the span is on the feet of a Torii 3 ?
I have just spent most of this afternoon making a isolation platform for the Torii that I have on order. I think that I have made a tactical error in making something without having any dimensions.
I'm pretty sure that the top plate that I made is too narrow for the feet.
Oh well, I like sanding for 3 hours anyway, it is very Zen like!

Owner of the infamous RED TORII and Dan the Redheaded Amp

IP Logged

ZYGI Seasoned Member HR-ONE Posts: 757	Re: Need some dimensions Reply #1 - 03/13/11 at 03:56:57 Donnie, The amp plate measures 17"wide X 11-1/2" deep. On the contemporary style base the bottom would be 3/4" larger, both directions, than the top plate. If your amp base is the molded type, the bottom plate is the same as the top plate. Steve puts the rubber feet right at the corners...... ZYGI
Back to top	All Decware amps and sources, Turning Point Audio speakers IP Logged

Donnie Seasoned Member Why does it hurt when I pee? Posts: 2193	Re: Need some dimensions Reply #2 - 03/13/11 at 04:22:28 It is looking like it will be close. I might have to get the board stretcher out. Anyone have a gallon ot two of add a thou'? They always say that a true pro can hide their mistakes. Next time I will wait so I can "Measure twice and cut once"
Back to top	Owner of the infamous RED TORII and Dan the Redheaded Amp IP Logged

Pages: 1

Forums › OLDER DECWARE GEAR SUPPORT › TORII MK III

‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE