Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
OLDER DECWARE GEAR SUPPORT >> TORII MK III >> Need some dimensions
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1299982849

Message started by Donnie on 03/13/11 at 02:20:49

Title: Need some dimensions
Post by Donnie on 03/13/11 at 02:20:49

Can anyone please tell me what the span is on the feet of a Torii 3 ?
I have just spent most of this afternoon making a isolation platform for the Torii that I have on order. I think that I have made a tactical error in making something without having any dimensions.
I'm pretty sure that the top plate that I made is too narrow for the feet.
Oh well, I like sanding for 3 hours anyway, it is very Zen like!

Title: Re: Need some dimensions
Post by ZYGI on 03/13/11 at 03:56:57

Donnie,

The amp plate measures 17"wide X 11-1/2" deep. On the contemporary style base the bottom would be 3/4" larger, both directions, than the top plate. If your amp base is the molded type, the bottom plate is the same as the top plate.

Steve puts the rubber feet right at the corners......

ZYGI

Title: Re: Need some dimensions
Post by Donnie on 03/13/11 at 04:22:28

It is looking like it will be close. I might have to get the board stretcher out. Anyone have a gallon ot two of add a thou'?
They always say that a true pro can hide their mistakes. Next time I will wait so I can "Measure twice and cut once"