Welcome, Guest. Please Login or Register
Decware Audio Forums
05/01/25 at 04:18:46 



Most recent 50 posts

Forums › SPEAKER FORUMS › NFX ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
NFX with Twin DFR65s ? (Read 7543 times)
Brian
Seasoned Member
****




Posts: 903
NFX with Twin DFR65s ?
07/11/10 at 06:28:48  
How would a NFX sound if the single DFR8 were replaced by two DFR65s with one of the whizz cones removed?
I ask this thinking of the high praises the Transmission Line speaker got with this driver set at a Decfest a few years back.  
Back to top
 
 
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 757
Re: NFX with Twin DFR65s ?
Reply #1 - 07/19/10 at 13:05:35  
Brian,

  I see no reason you couldn't use the dual DFR65,s in the NFX. The drivers in the dual trans-line speaker are modified differently to work in that trans line set up, and are not Steve's DFR65.

BobZ
Back to top
 
 
All Decware amps and sources, Turning Point Audio speakers
  IP Logged
Brian
Seasoned Member
****




Posts: 903
Re: NFX with Twin DFR65s ?
Reply #2 - 07/22/10 at 03:58:19  
I see.
Would you expect twin sixes to sound better or worse than the single eight?  Or no significant change?
Back to top
 
 
  IP Logged
ZYGI
Seasoned Member
****


HR-ONE

Posts: 757
Re: NFX with Twin DFR65s ?
Reply #3 - 07/22/10 at 12:30:17  
Brian,

 The main reason I went with the two 6-1/2" drivers was to tame the top end by adding some more bottom end. I don't see where it would be any more beneficial  using the dual drivers in the NFX. Other than it would be 1 dB more efficient and a 4 ohm load, which a Zen amp would benefit from.

BobZ
Back to top
 
 
All Decware amps and sources, Turning Point Audio speakers
  IP Logged
Brian
Seasoned Member
****




Posts: 903
Re: NFX with Twin DFR65s ?
Reply #4 - 07/23/10 at 00:38:24  
Thank You Bob.

I am always trying to do my part to improve audio, but I guess my recent batch of ideas are not it.  

Thanks for the information.
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › SPEAKER FORUMS › NFX ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge