Forums - DFR-65

Welcome, Guest. Please Login or Register

05/01/25 at 09:30:55

Most recent 50 posts

Forums › SPEAKER FORUMS › DFR65 / DFR8 / FRX / FRX2

‹ Previous topic | Next topic ›

Pages: 1

DFR-65 (Read 13194 times)

Steve Deckert

Administrator

If the 1st watt
sucks why continue?

Posts: 6397

DFR-65
07/07/09 at 02:23:49

The DFR-65 stands for Decware Full Range 6.5 inch The phase guide is a long story, but as you can see it is a tube. AFter 2 years of R&D all my designs fell short of the glass tube. The phase guide design of the DFR-8 does not work when scaled down for this driver.

This is a killer upgrade for anyone using a stock Fostex FE166 or 167E driver, such as those used in the Cain&Cain Abby.

In the Decware Corner Horns, this driver gives world class fidelity from 20Hz to 20kHz.... believe it or not!

IP Logged

KimKman Ex Member	Re: DFR-65 Reply #1 - 07/07/09 at 02:31:27 "In the Decware Corner Horns, this driver gives world class fidelity from 20Hz to 20kHz" Would love to hear this!
Back to top	IP Logged

Steve Deckert Administrator If the 1st watt sucks why continue? Posts: 6397	Re: DFR-65 Reply #2 - 07/07/09 at 20:36:11 KimKman, When can you come over? Steve
Back to top	IP Logged

skite30

Ex Member

Re: DFR-65
Reply #3 - 07/19/09 at 22:21:53

I bought a pair of these from steve last december. I was very happy with them but one started distorting. I sent it back to steve and he discovered some debris stuck in it. He sent them back to me at no charge either for shipping or diagnosing the problem. Terrific customer support.
I have them in a pair of ABBy's. While steve had the driver I installed an extra ff165 in 1 speaker. I was able to compare the 2 different drivers by going back and forth with the balance control. Something I would never try otherwise. The dfr6.5 was much smoother in the top end had better bass extension and gave a much more open sound than the 165. It was much richer sounding in the 400 and below range that is so hard for most single driver speakers to cover.
What all this add's up to is I feel it is a very worthwhile mod and the customer support is great.

IP Logged

CHansen

Ex Member

Re: DFR-65
Reply #4 - 07/14/10 at 17:13:16

I know there have bee recent supply issues for the Fostex drivers needed for the DFR-65 mod. Sarah was very understanding and they finally arrived yesterday. Tks.
I replaced my FE167Es in Fritz's front-ported BR boxes, not having the recommended BLHs on-hand.
Right out of the box they sound crisp and clean, clear and airy.
A little scratchy on the top end from time to time, but that should solve itself with break-in.
I must say using an EL84 as the phase plug is a bit much. I'll use the stubbies for break-in and then sub the EL84s later on for a test.

IP Logged

Pages: 1

Forums › SPEAKER FORUMS › DFR65 / DFR8 / FRX / FRX2

‹ Previous topic | Next topic ›