Forums - Scaling the housewrecker for a dayton 18

Welcome, Guest. Please Login or Register

05/01/25 at 04:14:27

Most recent 50 posts

Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Housewrecker Support Forum

Pages: 1

Scaling the housewrecker for a dayton 18 (Read 8399 times)

Audiogasm Ex Member	Scaling the housewrecker for a dayton 18 08/07/08 at 15:03:14 I have always ran my 18 in my living room in a vented enclosure and I thought I would try somethin new in the house with the housewrecker plan. is there another plan for 18s or how do I scale it?
Back to top	IP Logged

Azul Shiva Senior Member Visit www.ambiophonics.org for a better sound! Posts: 77	Re: Scaling the housewrecker for a dayton 18 Reply #1 - 12/25/08 at 14:33:33 You simply multiply everything by 1.2. It sais to use 19mm MDF wood but I would recommend you 30mm. It might cost more and the Sub will weigh 300 pounds but it sounds better.
Back to top	Visit www.ambiophonics.org for a better sound! IP Logged

TLB Ex Member	Re: Scaling the housewrecker for a dayton 18 Reply #2 - 05/23/09 at 20:27:53 I just downloaded the version II dated 7/07. Does the 1.2 factor still hold? Also do I use this factor to enlarge the port on top and the 2 bottom ports? Planning on using one or two Mach 5 IXL-18.2.2 speakers. Thanks for the help.
Back to top	IP Logged

Valiant Senior Member Posts: 90	Re: Scaling the housewrecker for a dayton 18 Reply #3 - 05/30/09 at 11:08:45 Stop the hole saw. I'm not sure on port sizes, but there may something on the forums, worth checking. I'll have a browse myself and see what the go is. Cheers
Back to top	IP Logged

Pages: 1

Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Housewrecker Support Forum