Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Housewrecker Support Forum >> Scaling the housewrecker for a dayton 18 https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1218117794 Message started by Audiogasm on 08/07/08 at 15:03:14 |
Title: Scaling the housewrecker for a dayton 18 Post by Audiogasm on 08/07/08 at 15:03:14 I have always ran my 18 in my living room in a vented enclosure and I thought I would try somethin new in the house with the housewrecker plan. is there another plan for 18s or how do I scale it? |
Title: Re: Scaling the housewrecker for a dayton 18 Post by Azul Baronis on 12/25/08 at 14:33:33 You simply multiply everything by 1.2. It sais to use 19mm MDF wood but I would recommend you 30mm. It might cost more and the Sub will weigh 300 pounds but it sounds better. |
Title: Re: Scaling the housewrecker for a dayton 18 Post by TLB on 05/23/09 at 20:27:53 I just downloaded the version II dated 7/07. Does the 1.2 factor still hold? Also do I use this factor to enlarge the port on top and the 2 bottom ports? Planning on using one or two Mach 5 IXL-18.2.2 speakers. Thanks for the help. |
Title: Re: Scaling the housewrecker for a dayton 18 Post by Valiant on 05/30/09 at 11:08:45 Stop the hole saw. I'm not sure on port sizes, but there may something on the forums, worth checking. I'll have a browse myself and see what the go is. Cheers |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |