Welcome, Guest. Please Login or Register
Decware Audio Forums
04/25/24 at 08:11:31 




Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Deathbox Support Forum ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
port placement (Read 668 times)
dalfe5
Ex Member
port placement
07/04/06 at 07:53:42  
i will be putting one maybe two DB10s in my ford ranger.  they will be loaded with a jl 10w3d2. which way would be best to face the port?  i have enough room to face them in any direction. also what would be a good crossover point?
Back to top
 
 
  IP Logged
Hotsauce
Ex Member
Re: port placement
Reply #1 - 07/04/06 at 08:22:12  
I set my crossover to 50Hz for critical listening, and 80 when I want to pound.

My guess is that you'll stop at 1 being enough.

John C.
Back to top
 
 
  IP Logged
Adrian D.
Ex Member
Re: port placement
Reply #2 - 07/04/06 at 12:32:07  
1 db10 is plenty enough to give the china in my room a pretty good shake at low level  :D
blends real nice with my mains, crossed at around 50. try all the sides : front, back, left, right. it's pretty easy with the db, since it has a square footprint.
Back to top
 
 
  IP Logged
dalfe5
Ex Member
Re: port placement
Reply #3 - 07/05/06 at 06:04:04  
i thought one might be enough so i built just the one for now.  if it does what i think it will then i may build the second one for my other vehicle.  thanks for the help.
Back to top
 
 
  IP Logged
Gex
Ex Member
Re: port placement
Reply #4 - 07/05/06 at 21:45:57  
There is also the truck box by Steve that he used in small trucks.
Back to top
 
 
  IP Logged
dalfe5
Ex Member
Re: port placement
Reply #5 - 07/05/06 at 21:58:56  
THOUGHT ABOUT THAT BUT THE BOX IS TOO SMALL.  I WOULD HAVE TO CHANGE IT TO FIT THE SUB.  SUB MOUNTING DEPTH IS TOO MUCH.  EMAILED STEVE DECKERT ABOUT IT AND HE SAID JUST TO EXTEND THE BOX TO FIT.  MAY TRY THAT LATER.  I JUST ENJOY THE BUILDING PROCESS.
Back to top
 
 
  IP Logged
Adrian D.
Ex Member
Re: port placement
Reply #6 - 07/06/06 at 05:19:43  
the thing about the truck box is that it's an example on how to build (brace and angle the panels) a box that small.
i personally would go with the DB  ;D
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Deathbox Support Forum ‹ Previous topic | Next topic ›

UPLOAD IMAGES HERE





Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge