Forums - Starting a Corner Horn project

Sunny2

Verified Member

Offline

Posts: 8

Starting a Corner Horn project
10/19/26 at 06:19:36

I always wanted Klipschorns. I thought Klipschorns were the ultimate. They seemed so holographic and fast and realistic. Now that I own a pair, I’m thinking that the staggered sound front and crossover Amp/LCR/Speaker interaction is fuzzing things up.

And so it begins… I’m working on a walnut burl wood veneered version of the Decware single driver corner horn. The non-veneered inner parts are getting sealed and assembled. The veneer shows up in a week or so.

I’m thinking these will sound even better than the Jensen Imperial my dad built when I was a youngster (when my folks were out I used to slip on a record and turn it up to blastisimo!). What a way to start you life-long listening reference!

(Photo was supposed to go here not allowed until my fourth post)

Back to top

IP Logged

Share:

Likes:

Bottlehead Seasoned Member Offline Posts: 684	Re: Starting a Corner Horn project Reply #1 - 10/19/26 at 07:21:27 I admire your ambition, S2. A few years ago I had looked at the DIY pages, and decided that the open baffle speakers were about the limit of my woodworking abilities. I look forward to photos documenting your progress.
Back to top	IP Logged Share: Likes:

Sunny2

Verified Member

Offline

Posts: 8

Re: Starting a Corner Horn project
Reply #2 - 10/19/26 at 08:15:20

Thanks for the reply. I’m in slow-build mode because of all the subtle challenges in the design.build. I’ll be posting pix when I hit the 4 post requirement. This is my first post here, but I now have a SE84UFO2.1 and a ZP3 with a VPI table and Denon DL103. I can’t wait to upgrade the speakers. I’m hoping to hear some this weekend.

Back to top

IP Logged

Share:

Likes:

JBzen Seasoned Member Offline Posts: 1697 Irwin PA	Re: Starting a Corner Horn project Reply #3 - 10/19/26 at 13:00:34 Hey Sunny 2! Very interested in your impressions once you get her done. Been to Steve's twice and never got a chance to auditioning his.
Back to top	{LoopA[AMC CD8b>XO3>Stokes DAC>Carver C-9]LoopB[Ortofon 2M Black>Scout jr/Otari MX5050B2>ZP3]LoopC[Cambridge CXN2>ZDAC>ZBOX]}Zrock3>CSP2+>SE8425th>OCC copper braid>lii Crystal 10". Isolation. AC filtering. EcoFlow R2Max, Room Treatment. IP Logged Share: Likes:

Sunny2 Verified Member Offline Posts: 8	Re: Starting a Corner Horn project Reply #4 - 10/19/26 at 17:51:46 Well I’m thinking it’s a long shot that he would bring them to Decfest but I have my fingers crossed. At least I’ll be able to hear similar sounding ones on his electronics.
Back to top	IP Logged Share: Likes:

Sunny2 Verified Member Offline Posts: 8	Re: Starting a Corner Horn project Reply #5 - 10/19/26 at 17:54:31 Finally I can post photos…
Back to top	IP Logged Share: Likes:

Donnie Seasoned Member Offline Why does it hurt when I pee? Posts: 2602 Central Illinois.	Re: Starting a Corner Horn project Reply #6 - 10/19/26 at 19:28:24 What drivers are you going to use?
Back to top	Owner of the infamous RED TORII and Dan the Redheaded Amp IP Logged Share: Likes:

Sunny2 Verified Member Offline Posts: 8	Re: Starting a Corner Horn project Reply #7 - 10/19/26 at 20:05:53 Lii Song Crystal 6. The ones Steve recommends.
Back to top	IP Logged Share: Likes:

MM Seasoned Member Offline Posts: 576	Re: Starting a Corner Horn project Reply #8 - 10/19/26 at 22:44:51 Awesome project, Sunny2. Keep the photos coming. I think you’ll be pleased with both Steve’s design and the result of removing the crossover from your system.
Back to top	Lumin T3x \| DSR3S IC \| SEWE 300b \| Crown XLS1000 \| ZSTYX SC \| Lii F15 & W15 in open baffle IP Logged Share: Likes:

Bottlehead Seasoned Member Offline Posts: 684	Re: Starting a Corner Horn project Reply #9 - Yesterday at 07:06:02 Nice work!
Back to top	IP Logged Share: Likes:

JBzen

Seasoned Member

Offline

Posts: 1697
Irwin PA

Re: Starting a Corner Horn project
Reply #10 - Yesterday at 14:26:54

Quote:

Well I’m thinking it’s a long shot that he would bring them to Decfest but I have my fingers crossed.

Maybe he will see this giving some incentive to do just that!

Your work is looking good. Steve had a tough time forming the horn flair without using a bunch of putty for smoothing. Interesting to see how you tackle it.

Back to top

{LoopA[AMC CD8b>XO3>Stokes DAC>Carver C-9]LoopB[Ortofon 2M Black>Scout jr/Otari MX5050B2>ZP3]LoopC[Cambridge CXN2>ZDAC>ZBOX]}Zrock3>CSP2+>SE8425th>OCC copper braid>lii Crystal 10". Isolation. AC filtering. EcoFlow R2Max, Room Treatment.

IP Logged

Share:

Likes:

Sunny2 Verified Member Offline Posts: 8	Re: Starting a Corner Horn project Reply #11 - Yesterday at 21:00:31 JBZen. So far so good on the joinery, but I haven’t gotten to the final flare yet. I’m building a couple Bruce Edgar 300 Hz horns and they have a compound curve problem too… I’m wondering if Steve has his bolted to the wall.
Back to top	IP Logged Share: Likes:

Sunny2

Verified Member

Offline

Posts: 8

Re: Starting a Corner Horn project
Reply #12 - Today at 05:09:28

Been working on staining/varnishing the inner parts you won’t see so I’ll know what to do on the parts that will be visible when pulled out from the wall. The trick is to also get the Baltic birch plywood to look like walnut. I want to make sure all the wood is coated to minimize moisture absorption and termites (?), and to seal the cabinet acoustically.

Back to top

IP Logged

Share:

Likes: