Forums - No output - VU meters completely flat

06/06/26 at 03:07:25

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » TROUBLESHOOTING

‹ No topic | Next topic ›

Pages: 1

No output - VU meters completely flat (Read 136 times)

mike allums

Verified Member

Offline

Posts: 3

No output - VU meters completely flat
05/29/26 at 14:26:06

Woke up this morning, grabbed a cup of coffee and powdered up my SE84UFO2.2 and put an LP on. No sound. Checked all the usual suspects and then noticed the VU meters were flat. The tubes appear fine, I have the amp connected to a decent power conditioner (power not the issue). I am going to call later this morning as I suspect this baby is going into the Decware shop, but just wondering if anyone else has had a similar issue. Cheers!

IP Logged

Likes:

Steve Deckert Administrator Online If the 1st watt sucks why continue? Posts: 6507 East Peoria IL	Re: No output - VU meters completely flat Reply #1 - 05/29/26 at 15:03:07 Any time someone has a problem like this, rather than wait to make a call or email and wait for a response, go to our tech support page: https://www.decwareproducts.com/techsupport It will tell you that you have a blown rectifier tube that needs replaced despite it lighting up.
Back to top	IP Logged Share: Likes:

mike allums Verified Member Offline Posts: 3	Re: No output - VU meters completely flat Reply #2 - 05/29/26 at 15:11:22 Thank you Steve. I really appreciate your prompt attention. Cheers!
Back to top	IP Logged Share: Likes:

mike allums Verified Member Offline Posts: 3	Re: No output - VU meters completely flat Reply #3 - 06/01/26 at 22:52:19 Looks like it's something else, because I just purchased a new rectifier tube and the problem persists. I've tried the little avatar support thing and it never loads. I'll call tomorrow.
Back to top	IP Logged Share: Likes:

Pages: 1

‹ No topic | Next topic ›