Welcome, Guest. Please Login or Register
Decware Audio Forums
05/04/26 at 00:12:50 



Most recent 50 posts

Forums › AUDIO FORUMS › TROUBLESHOOTING ‹ No topic | Next topic ›
Pages: 1
Send Topic Print
Tubes not fully seated on tube socket - SE341.6 (Read 30 times)
MK
Verified Member
**




Posts: 2
Tubes not fully seated on tube socket - SE341.6
Yesterday at 16:44:31  
I’ve noticed a seating irregularity with the power and rectifier tubes. The current socket screws are protruding enough to prevent a flush connection with the tube base. I’m concerned about potential arcing or intermittent connectivity; what is the preferred method to rectify this clearance problem?
Back to top
 
 
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 3214
Re: Tubes not fully seated on tube socket - SE341.6
Reply #1 - Yesterday at 22:10:21  
IMO the danger is very small, but using socket savers will usually fix the problem. And protect the tube sockets as well.
Back to top
 
 
[Volumio | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
Pages: 1
Send Topic Print
Forums › AUDIO FORUMS › TROUBLESHOOTING ‹ No topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge