Hi all,

I’m keen to try a single or dual W15s.  I use an active crossover were I can control levels to main and subwoofer amps as well as the crossover frequency and slope (12 or 24 Hz/octave). Two questions.

1. What sub amps drive the W15 well?
2. Given my external crossover, would a simple monoblock class d amp work?

Curious to hear what fans f the W15 are doing.

The Crown XLS 1000 and XLS1002 both synergize with the w15 very well. Don’t let the fact that they aren’t class A deter you. They also have built in crossovers, so you wouldn’t need that extra piece of equipment in your chain affecting your mains. I prefer the crossover slope of the XLS1000 but YMMV.

The only other amp I have tried was a Bryston 4B and used a capacitor/inductor crossover on the W15’s.  The Bryston was sluggish compared to the Crowns.

If you did want to use your crossover you could easily pick up an older Carver Class A. I have heard simple plate amps work.

Two votes for Crown amps. I will definitely check them out.
Anyone using Hypex or Purifi? I will call Zu and see what they suggest as well.  Looking at their subwoofers, they seem to use the fill in the lower octave where the mains naturally roll off approach. That would mean no more external crossover and probably high level (speaker cable) connections to a sub.

And I have never heard a W15.  But I did have the F-15 as mains for awhile before I sent them back to a buddy who bought them originally. So I am familiar with the Lii house sound.

Adding things up, a W15 in a Caintuck baffle with a reasonable class D amp (like a Crown XLS1002) is probably around $1500.  The traditional sealed 12" to 15" sub from Zu or Rel would be double that amount new.  So I have some $ motivation here as this is my frequently changing, experimental, fun, awesome, second system. Also, in my room, 2 Subs are definitely easier to integrate than one.