Welcome, Guest. Please Login or Register
Decware Audio Forums
05/10/25 at 04:03:48 



Most recent 50 posts

Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Trouble with my ZP3 (Read 589 times)
Cornbread
Verified Member
**




Posts: 3
Trouble with my ZP3
05/21/24 at 03:51:19  
I Turned on my ZP3 and immediately the rectifier tube lit up with a bright flash of white light. I checked the fuse and the fuse glass was black. Next I changed the rectifier tube and replaced the fuse. When I turned it on again I had the same result. A flash of white light and the new fuse blown and blackened. Any suggestions would be greatly appreciated.
Back to top
 
 
  IP Logged
CAJames
Seasoned Member
****


"I've run every
red light on memory
lane."

Posts: 2465
Re: Trouble with my ZP3
Reply #1 - 05/21/24 at 04:06:12  
Once is an anomaly, twice is a trend. You can try replacing the fuse again, and starting up the amp without the rectifier, and see if the other tubes still light up. But I'd talk to Steve ASAP.
Back to top
 
 
[FOOBAR2000 | Jay's CDT2 MRK3] -> Denafrips Terminator 2 + Gaia
Sumiko Pearwood -> Mapleknoll Athena -> Luxman SUT -> Mapletree Phono 3E
STR-1002 -> Woo WA22 -> 2x UFO25s, balanced monos
Omega SAM , Hifiman Arya, Audeze LCD-XC
  IP Logged
Pages: 1
Send Topic Print
Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge