Forums - DHC3 - Which Component?

09/13/26 at 06:39:53

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » DHC Silver Teflon Power Cords

‹ Previous topic | Next topic ›

Pages: 1

DHC3 - Which Component? (Read 2742 times)

bloodlemons Seasoned Member Offline Posts: 335 Tacoma, WA	DHC3 - Which Component? 03/19/24 at 04:59:09 As of tomorrow, I'll have a ZMA, ZP3 and CSP3. I have three DHC2 cables and a recently acquired DHC3. I'm wondering which component will be best served by the DHC3. Any experience or opinions on the topic out there?
Back to top	Thorens TD 125 Mk II w/Reed 3P arm & Benz Micro Ebony cart; Transcriptors Skeleton w/Vestigal Arm & ZYX Ultimate Exceed Airy cart or Grado TLZ; ZP3; CSP3; ZMA; ZSB; Lightspeed Attenuator; Space Tech Labs STR 1004 & 104; Sorcer X4+; SDFBs; Graphene Sluggos in all IP Logged Share: Likes:

Lon Seasoned Member Offline "Love without guts is worthless!" Philip K. Dick Posts: 28786 Munson Township, OH	Re: DHC3 - Which Component? Reply #1 - 03/19/24 at 09:56:55 I would start with the DHC-3 on the power amp. And then play around with it in each component. . . but I think it may best serve the amp.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,Dynagrid Jr;Rega RP3+all GrooveTracer mods;PSAudio:PST+DSD DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls,GCHA;Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Stradivarius interconnects;Stack EQ; phones:Sennheiser HD800S,ZMF Ori IP Logged Share: Likes:

bloodlemons Seasoned Member Offline Posts: 335 Tacoma, WA	Re: DHC3 - Which Component? Reply #2 - 03/22/24 at 20:37:39 That is what I was thinking too. Thank you for the response!
Back to top	Thorens TD 125 Mk II w/Reed 3P arm & Benz Micro Ebony cart; Transcriptors Skeleton w/Vestigal Arm & ZYX Ultimate Exceed Airy cart or Grado TLZ; ZP3; CSP3; ZMA; ZSB; Lightspeed Attenuator; Space Tech Labs STR 1004 & 104; Sorcer X4+; SDFBs; Graphene Sluggos in all IP Logged Share: Likes:

DanG

Verified Member

Offline

Posts: 44

Re: DHC3 - Which Component?
Reply #3 - 01/16/25 at 18:12:30

I purchased one DHC3. I was using DHC1 everywhere else.

I tried the DHC3 first on the amp, SE84UFO, and then I tried it on the CD player. I felt there were improvements both ways.

If I could only have only one DHC3 I'd probably place it with the amp. But once I heard it on the source, too, I suspected I had to have it on both amp and source. So I purchased another DHC3. I'm glad I did.

This is some of the best bang-for-buck improvement in my system. Improved detail on the instruments. Better overall sense of the soundstage. Better location within the soundstage. A surprising improvement in depth (and front/back location) in the soundstage.

THE DHC3 is heavier and stiffer than the DHC1, but I was able to replace all my DHC1 with DHC3. It's made a big difference, improved things in ways I didn't expect. I'm very happy I went for the upgrade to DHC3.

2 watts into 100 dB efficient crossoverless speakers near-field

IP Logged

Likes:

Flyr Verified Member Offline Posts: 8	Re: DHC3 - Which Component? Reply #4 - 04/29/25 at 04:20:23 I installed 2 DHC3 from My DAC and ZMA. immediate improvement to my whole system was not what I was expecting. I'm going to replace the remaining XLRs with these really great cable's. Thanks Steve.
Back to top	IP Logged Share: Likes:

Pages: 1

‹ Previous topic | Next topic ›