Forums - Can you tell the difference in speaker cables ?

Welcome, Guest. Please Login or Register

05/10/25 at 01:38:15

Most recent 50 posts

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›

Pages: 1

Can you tell the difference in speaker cables ? (Read 2103 times)

Eightweight Verified Member Posts: 19	Can you tell the difference in speaker cables ? 02/07/24 at 01:40:28 I have been considering and using a AU24 cable , so far there great but looking for others opinion if they can hear the difference
Back to top	IP Logged

MikeinMontana

Seasoned Member

Posts: 292

Re: Can you tell the difference in speaker cables ?
Reply #1 - 02/09/24 at 16:02:51

They look very nice. Never heard of them though....but I have always used pretty reasonably priced, well built cables and I apparently do not have bionic hearing like some do. If they are well built. work and sound good...I'm all set. (Never blind compared in my life) We are on a set income and 'things' are very jacked up now. (As designed) We have Blue Jeans and for our Zen, I purchased custom cables ( wanted certain lengths etc.) from Maze Audio. Paid a bit more for the pretty factor as we would see the cables from seated positions too. Quality as well. Love made in USA

IP Logged

pursuitofnow

Seasoned Member

Posts: 466

Re: Can you tell the difference in speaker cables ?
Reply #2 - 02/10/24 at 17:38:06

I can't speak to the AU24 cables but I can say that I used ZSTYX cables for a couple years which sound great, but there was a noticeable difference for the better when I switched to the Zenwave copper ribbon cables in 11ga. More refinement in the mid to low end and smoother but more detailed on the upper end. I think I saw in another thread that you have a Sarah amp, so you will notice differences in probably almost everything you experiment with (sources, cables, tubes, etc).

IP Logged

Geno Seasoned Member Without music, life would be a mistake. Posts: 2220	Re: Can you tell the difference in speaker cables ? Reply #3 - 02/10/24 at 20:04:44 Go with Decware cabling, and you can’t go wrong. Fantastic value. Trust Steve, and you’ll be golden.
Back to top	(2)SE84UFO(Balanced Monoblocs) OR Sansui AU222 Cambrge Audio CXN(ModWright) Crown XLS-1002 SL1210MK5(KAB Mods) Soundsm Aida MKll cart • Darlingt.Labs MP8b Otari MX5050-Bii2 R2R ZLC Power Cond Lii Audio PT-10 OR F-12 OR Betsy Alnico 8"/ W-15 in Open Baffle IP Logged

Paul2 Senior Member Second Hand Rose Posts: 85	Re: Can you tell the difference in speaker cables ? Reply #4 - 02/11/24 at 10:08:02 ^ + 1
Back to top	Roon Nucleus, Eversolo A6 ME, ZRock, CSP, SE84 UFO, TubeTots Small treated room IP Logged

Dominick

Seasoned Member

Still like that old
time Rock and Roll!!

Posts: 1423

Re: Can you tell the difference in speaker cables ?
Reply #5 - 02/13/24 at 12:26:23

As Geno pointed out, you can never go wrong with Decware cabling. I think that as you progress in this hobby, and the longer you are exposed to tube rolling, cable and interconnect rolling, the easier you will be able to discern the differences in the aforementioned. Obviously there are many factors involved with this; areas such as room treatment, room acoustics, the quality of your audio equipment/gear, electrical house wiring, etc etc. It all adds up with a cumulative effect making your system more resolving.

I just recently started capacitor/resistor rolling with my Err and Pinnacle speakers, and I’m amazed how much of a difference they make.

Dom

Rasp. Pi 4 [Roon], Schiit Bifrost True Multibit DAC, ZBIT, ZROCK2, My Audio Cables Ultra Silver+, ZSB, CSP2+ 25th, DAG Cables, DHC1, Torii MKIV 25th /2 White Zen SE84C+ 25th mono’s, Rega P2 Turntable, White top ZP3, Velodyne Dual Firing Sub, ERR’s [Bubbinga Wood]

IP Logged

Pages: 1

Forums › AUDIO FORUMS › General Discussion and Support

‹ Previous topic | Next topic ›