Welcome, Guest. Please Login or Register
Decware Audio Forums
03/29/24 at 01:50:54 




Pages: 1
Send Topic Print
Pre-Out subwoofer connection (Read 587 times)
Frank Troeger
Verified Member
**




Posts: 9
Pre-Out subwoofer connection
11/28/22 at 07:46:27
 
Hello from Germany, i want to add an active subwoofer to the ZKIT1 and for that i need an additional output RCA connector, on what position? Is this possible to add this to the ZKIT1 without complex modifications? Thx Frank
Back to top
 
 
  IP Logged
4krow
Seasoned Member
****


IMAGINE WHIRLLED
PEAS

Posts: 1606
Re: Pre-Out subwoofer connection
Reply #1 - 11/28/22 at 17:47:21
 
Frank,

What I think that you mean to say is how would a subwoofer RCA output be added to the kit. My understanding is to add the extra RCA output jacks on the back, and solder them in parallel with the existing RCA jacks. It might be wise to add a 100 ohm resistor in series with the second RCA jack output. This is used for electrical separation from other connected equipment.
Someone please correct me if I am wrong here.
Back to top
 
 

Decware 34I.3 integrated amp/Forte' 3 bass amp/Velodyne SMS-1 bass mngmnt system/Decware ZOB speakers/Audio Nirvana 8" bass drivers/Xiang Seng DAC/ LR Audio Computer/Rega Apollo R CDP/Emotiva ERC3 CDP/BPT 3.0 power cond.
  IP Logged
Frank Troeger
Verified Member
**




Posts: 9
Re: Pre-Out subwoofer connection
Reply #2 - 11/29/22 at 13:15:42
 
Hello 4krow,
thanks for your answer, but with the fixed 100Ohm resistor there is no volume control on that output. But i need a volume control on the subwoofer input.
Frank
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print