Welcome, Guest. Please Login or Register
Decware Audio Forums
05/08/25 at 04:28:23 



Most recent 50 posts

Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Fuses (Read 1608 times)
Tooppy
Seasoned Member
****




Posts: 186
Fuses
11/25/22 at 12:46:13  
I read in the manual of my SE84-UFO2,1 that the power fuse is 3A but the one I have in the amp is 1,6A !
Is this a typo in the manual ? Or is it because I am under 250v (EU standard) and the manual is written for the 110v of the US power supply ...the transformer's value being different ?
Back to top
 
 
IFI Streamer - RME_ADI2_DAC_FS - SE84_UFO-2,1 - LII_F15 in Karlsonator DIY - Decware interconnect - DIY speaker cable - Thorens TD166MKII_Grace G707+A&R p77+Schiit Mani - FirstWatt F5 - Klipsch KG3 - Rogers LS3/5A - Leak Sandwich modified - Grado SR125X modified
  IP Logged
Lon
Seasoned Member
****


"Love without
guts is
worthless!"
Philip K. Dick

Posts: 25778
Re: Fuses
Reply #1 - 11/25/22 at 13:43:28  
I believe it is because of your country's voltage. If it weren't correct, it would likely blow that value fuse consistently. On the forum Steve has posted lower fuse values for European voltages before.
Back to top
 
 
HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1
  IP Logged
JBzen
Seasoned Member
****




Posts: 1528
Re: Fuses
Reply #2 - 11/25/22 at 15:19:55  
Typically upping the voltage will lower the amperage draw with the same load. So doubling the voltage will half the current. Ohms Law I=V/R

John
Back to top
 
 
LoopA[AMC CD8b>XO3>Stokes DAC>Carver C-9]LoopB[Ortofon 2M Black>JVC QL-F4/Otari MX5050B2>ZP3]LoopC[Cambridge CXN2>ZDAC>ZBOX>Zrock2]}CSP2+>SE8425th>9AWG silver/copper braid>lii Crystal 10" Huijgen Cabinets. Isolation. AC filtering. Room Treatment.
  IP Logged
ArtMan
Seasoned Member
****




Posts: 184
Re: Fuses
Reply #3 - 11/25/22 at 18:03:51  
When I originally got my SE84UFO amp, it also came with a 1.6 amp fuse. I would not make too much of it.
Back to top
 
 
Holo Audio May L2 DAC
Decware SE84UFO25/All Cryotone tubes
Caintuck Cherry Magnum/Lii Audio F15's
Decware DSR3S/DHC2/ZFOCUS cables
Verifi SDFB's w/Graphene Sluggos
Verifi Puron/Snubway
  IP Logged
Pages: 1
Send Topic Print
Forums › AUDIO FORUMS › General Discussion and Support ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge