After placing my order in early July, I received my Rachael amp this past week. My system consists of a VPI Scout turntable with Soundsmilth cartridge; PSAudio phono preamp; Pass Labs DC-12 preamp; PSAudio Directstream DAC and internet card; PSAudio DirectStream Power Plant 12; all tied together with Morrow Audio cables of all kinds; Pure Audio Project Quintet10 speakers with Voxative driver (these speakers have the Gaia feet from Isoacoustics); REL t/7i subwoofer. I also have the Caintuck Betsy Baffle speaker, and a rebuilt Magneplanar SMG ribbon speaker from the 70's (still sounds good, by the way - not very efficient) and I have yet to have time to try them with the new Rachael.

Prior to getting the Rachael, I was using the First Watt SIT-3 amplifier. I had tried other amps in my system (all solid state), but had never found anything remotely close to the sound that the SIT-3 delivered. I have always been skeptical of using tube gear because of my perception that they are very high maintenance, and I am more interested in listening to the music than to rolling or replacing tubes. For example, if you go to Nelson Pass' First Watt website, you will discover that he has never had a SIT-3 returned for product failure - quite an impressive record. The SIT-3 provided a good soundstage and took all harshness out of the upper octaves that I have sometimes experienced with other solid state amps. It is only 27 watts and all class A, so it might be the closest thing to a tube amp. It is also plenty hefty enough to easily drive all of my speakers. The bottom line is that I am very happy with this amp, and questioned whether for any reasonable amount of money it would be possible to improve upon it.

Since I got the Caintuck Betsy Baffles, and in communicating with Randy, he always raved about the Decware amps and how great the made the Betsy Baffles sound. The net result is that after some dithering, I decided to order one of the Decware amps. I found myself really struggling with which one to order, but Randy said he was partial to the Rachael, and since this was my reluctant venture into tubes, I decided that 6 watts of power seemed enough for my setup, and because I was not convinced that I would see any improvement in my system, I opted for a lower priced unit with what I hoped was adequate power, with only one set of inputs - a standard unit with no add ons. I figured that if it did not perform, at least I can return it, even though I would burn 10 percent of the purchase price as a restocking fee.

I received the Racheal, and it was very well packaged, and the heft and build quality right out of the box were obvious. I figured out which tube goes where (still haven't figured out which direction of the switch is for 4-8 amp-speakers or 8 amps and above; the manual is silent on that, but I also cannot really tell any difference in positioning the switches). Got everything connected up, good news is that I must have hooked everything up properly, since after about 30 seconds meters came up to speed - and they matched! I like the auto bias feature, at least for a newbie like me.

I have used Randy's playlist that he sends out with the Betsy Baffles as a sounding board to test out new gear since I received those speakers. So, back to my trusty playlist to see if even my ears are able to discern any differences from the First Watt amp. Oh my goodness, all of the music took on completely new and improved musicality and tonality. The soundstage expanded; instrument placement was almost able to be visualized, and vocals sounded lush, rich and had a "right there" quality to them. Guitar especially became even richer and more musical. I found myself wondering what happened. Best news of all was I was tapping my toe to nearly everything I played. The music came to life. The First Watt is a great amp, but at least in my system, the Rachael is markedly better.

I tried the Rachael with and without using the preamp - I think it is ever so slightly better without the preamp, but not enough of a change to make me want to leave the preamp out and manually switch cables around, given my Rachael configuration only has one set of inputs. I know I can buy the Decware cable switcher, but then I also need more cables - not worth it for me, YMMV.

I have upgraded other aspects of my system in the past, most of the time realizing subtle improvements in sound. Adding the Decware amp in was not subtle! It singularly made the biggest change for the better from anything I have ever done to my system. In all the investments I have made in stereo gear, I have never received more value for money than this - and a lifetime warranty to boot. Kudos to the Decware team, and my thanks to Randy for his recommendation. No, I will not be returning this amp for a refund - someone will have to pry it out of my cold, dead hands.

Good review!  A testament to the value of Decware products and your choice of advisors.

I am eight years into my white top SE34 and can not see any reason to change!

Enjoy the music!

Great news CDN. Exciting 1st impressions. Looking forward to your thoughts after the Rachel burns in!

Hey Chris and Piezoman, Regarding the Decware preamp - currently I need two balanced inputs in to a pre-amp, and one single ended out for the Rachael amp. I cannot see that any of the Decware preamps fit that configuration, and I am not interested in using converters, so what do you suggest?  Craig

Hi Chris, Thank you for your thoughtful input. I will put a call in to Steve to see what he recommends - it sounds like some variant of the ZTPRE is the answer with a couple of converters from XLR to RCA. I always get a little uncomfortable that using converters of any type will degrade the sound, but perhaps I am anticipating something that has little overall sound impact. I am quite happy with my Pass Labs DC-12 preamp; but I also was happy with the First Watt SIT-3, so perhaps there is even better sound quality to be had with the Decware preamp. This has been an interesting journey for me thus far, and I think I would be one of the last people to transition from SS to tube anything! Living and still learning  

CDN - I understand the concern on adaptors/ converters etc...but what I have learned from all these years with Decware/this forum and Steve is that if Steve is selling something, it won't hurt the signal chain. I had concerns adding the Decware switch box to make the system easier for family members to use. No sonic damage done. The Zen Master will guide. Welcome to the tribe and keep us posted on your adventure. Happy listening, Chris.
P.S. All the years that I have been on this fourm, I have found Lon's input and insights to be well worth the read...actually everyone here has some great input.

I know its a year old thread but wanted to take some time to thank you for your review.  I pulled the trigger on the Rachael on Black Friday, so still have a long way to go but it is highly encouraging to know that you immediately loved it over an amp that Nelson Pass designed! Reading through the comments, it looks like ppl are also recommending the preamp.  I recently got a Schiit Freya Plus tube preamp (my first experience with tubes) and I am really enjoying it. I will most likely pair that with the Rachael to begin with and decide if I want to get a Decware preamp instead. Would love to hear your thoughts and experiences, one year later.