Decware has proven that they are a tube loving group as only one Zkit60 has been sold to date.  Quite a surprise to everyone involved.  The amp itself sounds wonderful, nothing less would be allowed on the Decware site.  The same amplifier, assembled and in a different chassis (not as nice - much smaller heat sinks), is selling quite well under the SET120 name on the Audio by VanAlstine web site.  The same basic design has also inspired a higher power SET400 and a fully differential  SET600 mono block.

The only tip I have is buy your own chassis, more than likely from China on Ebay.  This will get you what you want (0, 1, or 2 volume controls) and save you some shipping.  The original chassis is here:
https://www.ebay.com/itm/silver-aluminum-both-sides-radiator-amplifier-chassis-a...

If you prefer a smaller chassis, a "2412" style can also be used, but is a little tighter inside and requires the PCB's to be mounted "mirror image" (one up side down) on the heat sinks so there is room for the transformer:
https://www.ebay.com/itm/2412C-Full-Aluminum-Enclosure-mini-AMP-case-power-ampli...

If you build one and it fails to work it can be sent to me for repair at a reasonable rate.


Dan

I would think the build quality would be the same or better than an amp that is mass produced. The reason I would say that, taking build skill out of the equation, because the builder will take their time building it and making sure everything is up to their level of quality or how they want to see the final product. That is why I like kits. It's up to the builder to make it custom to what they like to see as the final product. It's the little details that matter to some builders. For example, when I built the last amp I made sure all the resistors faced the same way and the value facing out. It makes it look nice and easy to trouble shoot if there are issue. I don't think someone building an amp for mass production would take time to do this. It also gives you the chance to put in better components if you feel they would improve the sound. I believe a custom built amp will always be better in quality than something mass produced. That is why Decware amps have life time warranties.
If I did not have a few amps sitting around I would love to build one of these to see how it sounds.

John

Donnie, only a chance influx of a little cash at a critical moment allowed me to have SE84UFO 25th Anniversary amp instead of this one. It is a great sounding amp, really, at any price. I have helped both my daughters decide to use one of these and they are wonderful!

Welcome Brian! Glad to see another DIYer on here. I haven’t done the 60 kit but gave it a lot of consideration early on. I ended up with the zkit 1 just because it had so many more mod options and documentation available.
And for sure, Donnie’s work is awesome and inspiring.

Sorry Donnie, haven't been any updates except for this one...

IT LIVES!!

I ordered the amp in early September but I wasn't able to start working on it until mid October.  Construction went well, I took my time and double checked everything.  I haven't done anything like this since I built Heathkits back in the early '80's.  I used a Dissipante case from DIY audio store, it took a little modifying because the case is pretty low profile, but I'm real happy with the finished result.  I've been listening to it all day today, and so far I'm really happy with it.  My previous amp was a Willsenton R35 EL34 integrated, which was very "tubey" I guess, but seemed to mask details compared to previous setups.  Zkit60 seems to be as easy on the ears but there is a lot more musical nuance coming through.  

If anyone is reading this wondering if they should take the plunge I will whole heartedly say yes!  I have a real pride in ownership now, and as long as you are careful and can follow instructions implicitly, it was pretty easy and fun to assemble.  I am very happy with the sound as well, and as burn in occurs and I listen more, I will update the thread.

Thanks again to Decware, DanK, and the "inspiring"  :D Donnie!

Man, that is a great looking chassis! Really, so many that I have built in the past are so-so. Yes, of course, we need to see the insides too.

Brian (and Donnie)

Thanks for the nice email, Brian

Here's a little tip for you, discovered about a year ago so it's got possibilities for Donnie too:  If you are getting an audible hum at the listening position in between songs (when no music is playing), SOMETIMES this can be reduced, sometimes substantially, by rotating the transformer to "null out" the noise at idle.  Obviously, once the best "null spot" is found you tighten the transformer back down.  I've seen this fix some pretty bad noise issues and have incorporated this adjustment as one of the last steps in the build process.

Dan

Well, that is a fine build in and out. I see that you took time to make things look right. I appreciate the advice about rotating the transformer. Pretty cool.