Forums - 274B MOD?

EdGuY Seasoned Member Offline Fact is just a solid opinion. Posts: 133 Finland	274B MOD? 04/05/17 at 09:20:28 Maybe some of you can help? I was wondering is there any 274B tube modifications for CSP2+ and Torii III amps?
Back to top	Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596 IP Logged Share: Likes:

Rivieraranch Seasoned Member Online Posts: 2153 x0\|Ft. Lauderdale\|USA\|\|0\|0\|FL,Florida	Re: 274B MOD? Reply #1 - 04/05/17 at 15:50:26 I think you could change the resistor somewhere. There was a thread about using the 274B with these amps and having problems at startup. But if you do that you change the way they are designed and then you could lose some of the unique characteristics of the sound.
Back to top	MINI TORII & ZROCK2 both anniversaried; 'Lil Audio F-15; TECHNICS SL1200MK2 KAB MODDED TT; ONKYO 6 DISC CD; MARANTZ 2226B; SCHIIT MULTIBIT DAC; SENNHEISER HD-580s IP Logged Share: Likes:

mark58 Seasoned Member Offline Posts: 5647 Texas	Re: 274B MOD? Reply #2 - 04/05/17 at 16:04:27 I'm not a tech expert but I thought I read here that the Valve Art 274B was more like a 5U4G internally. I think I've got three sent with new Decware gear...CSP3, Taboo MK III and ZP3 I think. So maybe no mod needed? I'd ask Steve.
Back to top	"The man that hath no music in himself, nor is not moved with the concord of sweet sounds, is fit for treasons, deceptions, and spoils; The motions of his spirit are dull as night and his affections dark as Hell. Let no such man be trusted." William Shakespeare IP Logged Share: Likes:

Lon Seasoned Member Online "Love without guts is worthless!" Philip K. Dick Posts: 28313 Munson Township, OH	Re: 274B MOD? Reply #3 - 04/05/17 at 16:06:14 Right, the Valve Art is safe to use, but it is NOT the same as other 274Bs which can cause problems or have a shortened life in a Decware amp.
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,Dynagrid Jr;Rega RP3+all GrooveTracer mods;PSAudio:PST+DSD DAC Mk II,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls;Mapleshade SamsonV3;VeraFi Audio cpts VooDoo:Cremona+Amati interconnects;Stack EQ; headphones:Sennheiser HD800S,ZMF Ori IP Logged Share: Likes:

will

Seasoned Member

Offline

Posts: 3161

Re: 274B MOD?
Reply #4 - 04/05/17 at 16:47:03

It seems to be about the power supply cap values, by most reports new Valve Art/Shuguang 274Bs fine, but a different story with more traditional 274s. Here is a post Steve made some time ago.

Not an answer, but a pointer.

"Re: Safe rectifier roundup (Decware input pending)
Reply #1 - 07/05/12 at 11:38am Decware amps typically use between 33 ~ 47uf caps as the first section of the power supply filter after the rectifier tube.

In the case of the SE34I.3 the value is 47uf.

So far all the 274B's I've looked at ( and I haven't looked at all of them ) would like to see less than 10uf as the first section of the power supply filter. Going beyond the value could cause flashing upon startup. That said, many people ignore the warning and use it anyway, claiming the sound is worth the potentially short-lived tube.

Steve"

https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1341384562/1#1

Back to top

All Modified: PSA-P5>DIY Strip/Shunyata Defender, Verifi...>RevolutionMacMini/Amarra-KTE Singxer/MP-DX DAC/ZR2/Zstage/CSP3>Torii IV>Omega SAHOM/AudioSmile Tweeters, SVS Micro3000>mostly DIY PCs, ICs, USB, I2S, Speaker>Stack and aluminum w ball bearing feet...

IP Logged

Share:

Likes:

EdGuY Seasoned Member Offline Fact is just a solid opinion. Posts: 133 Finland	Re: 274B MOD? Reply #5 - 04/05/17 at 21:34:00 I thought there is a solution for that when I saw this: https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1409441941
Back to top	Tannoy Prestige Canterbury GR,ST-300mg,IsoTek Aquarius EVO3,YARBO power.c,RGC-24,TORII MK3VCaps+silver wires+carbon resitors,CSP2+,DENON DP-A100+Karat17D3,GRADO PH-1,AURALiC Aries,GUSTARD X20-PRO ES9028PRO DAC,WA-Quantum chips,tubes WE 422A,GEC KT66,6N23P,USAF-596 IP Logged Share: Likes:

will

Seasoned Member

Offline

Posts: 3161

Re: 274B MOD?
Reply #6 - 04/06/17 at 01:39:58

I don't know details about modding for 274Bs, but have a few things that may help. The MKII post you linked is shown with 5U4G-STs, saying it can use 274B and 5AR4s also...Both my MKIV and CSP3 have 47uf caps in the power supply. Unless the MkII post is referring to the Valve Art 274Bs, based on Steve's post, standard 274Bs needing 10uf or less caps, this seems a long way off.

But, if that MKII was modded for the real 274Bs, the upgrade is listed with the usual Decware Hazen and attenuator upgrades, so it may well have been done at Decware....Even if not, Steve has tried and heard a lot of things in Torii development. I would call and ask.

Back to top

All Modified: PSA-P5>DIY Strip/Shunyata Defender, Verifi...>RevolutionMacMini/Amarra-KTE Singxer/MP-DX DAC/ZR2/Zstage/CSP3>Torii IV>Omega SAHOM/AudioSmile Tweeters, SVS Micro3000>mostly DIY PCs, ICs, USB, I2S, Speaker>Stack and aluminum w ball bearing feet...

IP Logged

Share:

Likes: