Forums - Headphone Output ?'s

Welcome, Guest. Please Login or Register

05/01/25 at 12:08:36

Most recent 50 posts

Forums › OLDER DECWARE GEAR SUPPORT › ZCD240

‹ Previous topic | Next topic ›

Pages: 1

Headphone Output ?'s (Read 7487 times)

rodge827

Verified Member

Posts: 15

Headphone Output ?'s
10/13/13 at 05:31:15

Hi All and Steve,
This is my first post here on the Decware forum.
I've been lurking here for years and thought it time to give up my voyeuristic ways! Wink

I'm in the process of going from a dedicated 2 channel rig to a can set up, due to loosing my listening room to the return of my daughter and granddaughter.
So;
Is the headphone output connected to the tube output ?
What is the measured output for the headphone stage?
All of my music is still on those tiny silver platters and I think that the ZCD 200i would be a good way to retrieve the data.

Chris

IP Logged

Lon

Seasoned Member

"Love without
guts is
worthless!"
Philip K. Dick

Posts: 25750

Re: Headphone Output ?'s
Reply #1 - 10/13/13 at 07:27:21

Welcome Chris!

I think that the headphone circuit is not connected to the tube output, as on the product page Steve writes:

The stock variable headphone jack was left in tact (sic) and un-modified.

Thus I'd say no.

The headphone output I couldn't find doing a quick internet search. If you want to look for that specification, the base player that Decware uses is the CD-200i.

HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1

IP Logged

jameskk Seasoned Member Posts: 206	Re: Headphone Output ?'s Reply #2 - 10/13/13 at 12:57:18 That is correct what lon said . being the owner of one . however the ipod dock is connected to the tube stage. Maybe the ZCD and Decwares headphone amp or ultimately the CSP2+/3.
Back to top	IP Logged

rodge827 Verified Member Posts: 15	Re: Headphone Output ?'s Reply #3 - 10/13/13 at 15:10:34 Lon and jameskk, Thanks for the replies. I must have missed the part about the headphone out being stock. It was late here in NJ when I read it and... My thought was to start with a ZCD200i and then move into a CSP2+3 or possibly a Taboo. Over all I'm trying to simplify my set up for space considerations. Chris
Back to top	IP Logged

Lon Seasoned Member "Love without guts is worthless!" Philip K. Dick Posts: 25750	Re: Headphone Output ?'s Reply #4 - 10/13/13 at 16:39:39 You're welcome. Best of luck!
Back to top	HR-1,ZBIT,ZROCK3,SEWE300B,CSP3-25mod; Rega RP3 all GrooveTracer mods;PSAudio:PST+DSD, DAC Mk II, P15,NPC,PowerBases,AC-12 pwr cbls, Reference spkrcbls; Mapleshade SamsonV3; VooDoo:Cremona+Amati interconnects;Stack EQ; headphones: Sennheiser HD800S,ZMF Ori,Oppo PM1 IP Logged

Pages: 1

Forums › OLDER DECWARE GEAR SUPPORT › ZCD240

‹ Previous topic | Next topic ›