Forums - Benchmark DAC1 USB OK as "pre" for the Taboo?

07/01/26 at 12:08:49

Most recent 50 posts
Welcome, Guest. Please Login or Register

Forums » The ZEN TABOO

‹ Previous topic | Next topic ›

Pages: 1

Benchmark DAC1 USB OK as "pre" for the Taboo? (Read 9860 times)

MoNelly

Verified Member

Offline

Posts: 33

Benchmark DAC1 USB OK as "pre" for the Taboo?
02/07/11 at 06:43:00

Has anybody used a DAC1 USB in front of the Taboo? The preset "calibrated" mode sets the output at 2vRMS, so does that mean in the variable mode the output goes up when I turn the pot?

I know the conventional wisdom is to put the CSP2+ in front of the Taboo, but I'm working with a very tight budget. I'm looking to power a set of DM944's I picked up from Audiogon.

Any and all comment welcome, and thanks!

IP Logged

Likes:

Rivieraranch Seasoned Member Offline Posts: 2153 x0\|Ft. Lauderdale\|USA\|\|0\|0\|FL,Florida	Re: Benchmark DAC1 USB OK as "pre" for the Taboo? Reply #1 - 02/07/11 at 12:37:56 Can the DAC be set to a higher voltage. That might be better. I think with 2 volts you can still get a satisfying volume out of the TABOO
Back to top	MINI TORII & ZROCK2 both anniversaried; 'Lil Audio F-15; TECHNICS SL1200MK2 KAB MODDED TT; ONKYO 6 DISC CD; MARANTZ 2226B; SCHIIT MULTIBIT DAC; SENNHEISER HD-580s IP Logged Share: Likes:

Pale Rider

Seasoned Member

Offline

Posts: 1285
NorCal USA

Re: Benchmark DAC1 USB OK as "pre" for the Taboo?
Reply #2 - 02/07/11 at 17:10:53

I am asking myself this same question with respect to my PS Audio III, with the Cullen Stage IV mods. The stock PSA delivers 2.75V through its RCA outputs. I have not yet determined whether the Cullen mods have any effect on voltage output but I do not expect so.

My plan is to use the Taboo with Audez'e LCD-2 headphones. For that reason, I have ordered a 12AX7 (Genalex Gold Lion) for the Taboo, but I still have this sneaking suspicion I will need to insert a preamp into this circuit to drive the LCD-2 cans as well as I might like.

IP Logged

Likes:

MoNelly Verified Member Offline Posts: 33	Re: Benchmark DAC1 USB OK as "pre" for the Taboo? Reply #3 - 02/07/11 at 17:42:17 I too am planning to run with the LCD-2s (I'm on the waitlist, hence the limited budget). With the Benchmark, I have variable gain. The DLIII (a great DAC I used to own, minus the mods) does not. However, I know the DLIII is known for high output.
Back to top	IP Logged Share: Likes:

Pale Rider Seasoned Member Offline Posts: 1285 NorCal USA	Re: Benchmark DAC1 USB OK as "pre" for the Taboo? Reply #4 - 02/07/11 at 17:44:41 In balanced mode, the output is quite healthy. That is how I run it out to my RSA Apache, which I use to run my HD800s. But that 2.75V in SE mode is starting to look a little anemic to me.
Back to top	1: PS Audio DirectStream \| BHK Preamp & Monoblocks \| Legacy Audio Aeris 2: MSB Select II \| Custom T2 & Mjolnir Carbon CC \| Stax SR-009 & 007 3: Lumin A1 \| HeadAmp GS-X mk2 \|Meze Empyrean & HEDDphone 4. Schiit Vidar \| RAAL Requisite SR1a IP Logged Share: Likes:

Pale Rider Seasoned Member Offline Posts: 1285 NorCal USA	Re: Benchmark DAC1 USB OK as "pre" for the Taboo? Reply #5 - 04/04/11 at 20:16:36 Well, output of the PS Audio in non-balanced mode is not an issue. With both the 12AX7 and 12AU7 output tubes, there is more than ample gain. More. Than. Ample.
Back to top	1: PS Audio DirectStream \| BHK Preamp & Monoblocks \| Legacy Audio Aeris 2: MSB Select II \| Custom T2 & Mjolnir Carbon CC \| Stax SR-009 & 007 3: Lumin A1 \| HeadAmp GS-X mk2 \|Meze Empyrean & HEDDphone 4. Schiit Vidar \| RAAL Requisite SR1a IP Logged Share: Likes:

Pages: 1

‹ Previous topic | Next topic ›