Welcome, Guest. Please Login or Register
Decware Audio Forums
05/02/25 at 02:59:43 



Most recent 50 posts

Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Wicked One Support Forum ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Can Someone Tell Me If These 8's Will Work (Read 6798 times)
only126db
Ex Member
Can Someone Tell Me If These 8's Will Work
03/17/10 at 15:15:24  
Ok I am really thinking about running a couple 8's I have, but on the plans page it says to model the driver as a 4th order bp but I've seen on here to model for a sealed enclosure.

I've also seen where it's better to use a low fs driver.

So before I waste my time and $$ could someone with experience with this enclosure let me know if I can use these drivers?

Specs=
FS 40hz
re 7.73ohm
le 6.14mh
qts .529
qes .588
qms 5.273
vas .54cu ft - 15.4L
84.4db 1w/m
xmax 8mm - .31"
rms 200w
pk 400w
displ .035
recom sealed .3
recom ported .625

thx in advance
Back to top
 
 
  IP Logged
Steve Deckert
Administrator
*****


If the 1st watt
sucks why continue?

Posts: 6397
Re: Can Someone Tell Me If These 8's Will Work
Reply #1 - 03/17/10 at 16:33:49  
Driver is a waste of time.  QTS is too high, and more importantly the efficiency of 84dB is too low.  Find something that is 90dB or more.
Back to top
 
 
WWW   IP Logged
only126db
Ex Member
Re: Can Someone Tell Me If These 8's Will Work
Reply #2 - 03/17/10 at 16:54:57  
Ok, Thanks for the speedy reply.

Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Wicked One Support Forum ‹ Previous topic | Next topic ›







Forums » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.


Source Forge