Forums - Help me building deathbox II with 12 inch driver

Welcome, Guest. Please Login or Register

05/01/25 at 03:54:41

Most recent 50 posts

Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Deathbox Support Forum

‹ Previous topic | Next topic ›

Pages: 1

Help me building deathbox II with 12 inch driver (Read 22907 times)

thenvk

Ex Member

Help me building deathbox II with 12 inch driver
07/21/09 at 22:59:11

HI,

This is my first post here and I am from INDIA.I am planning to build my first DIY sub Death box II with either a sony/Pioneer/Kenwood drivers.

Here are my queries
1. I Was not able to find the Death box II plans for 12 inch drive. can some one send me the link? (I have ordered the password).
2. How good are the above mentioned drivers?
3. I am building this for my home, this will be run on a lm3886 amp of 200w rms. I need smooth and deep bass. So how good this design will be for requirement considering one of the above drivers with this model

thanks

IP Logged

thenvk Ex Member	Re: Help me building deathbox II with 12 inch driver Reply #1 - 07/21/09 at 23:00:20 Sorry, as the earlier one was my first post, links were not allowed.. here are the available subs for me http://shopping.rediff.com/shop/productdisplay.jsp?Pioneer-TS-W307D2/D4-12inch-S... http://www.naaptol.com/buy-online/WO-best-shopping-deals-W81885O/automobiles/aut...
Back to top	IP Logged

ZYGI Seasoned Member HR-ONE Posts: 757	Re: Help me building deathbox II with 12 inch driver Reply #2 - 07/21/09 at 23:53:45 thenvk You want the DBK-212 for the 12" driver and home use. The Death box-II could could be scaled up for a 12" driver, but I recommend using the DBK212 plans on the site first. Your second link was no good, can you fix the link? BobZ
Back to top	All Decware amps and sources, Turning Point Audio speakers IP Logged

proud_indian Seasoned Member I love YaBB 1G - SP1! Posts: 202	Re: Help me building deathbox II with 12 inch driver Reply #3 - 07/22/09 at 03:22:52 Hi, Which part of India are you from? I just built mine, so if you need any help you can call me on 98400 89480. The plans can be downloaded from the site. shreekant
Back to top	Oppo, hdd,84c, pm6a, cd200, foreplay lll, zbox, bottlehead sex amp, zob, various stuff that make up two systems IP Logged

thenvk

Ex Member

Re: Help me building deathbox II with 12 inch driver
Reply #4 - 07/22/09 at 07:58:25

Bob and Shreekanth thanks for the replies.

@Bob

I was able to find the plans here only for the 10 inch driver model(dbk10). I did not find the link for the 12 inch model. Can some one PM me the same....

The first link is for Pioneer TS-W307D4 model driver
The second one is for the Sony XS-LP121P 1200 model driver.

@Shreekanth

I am from Hyderabad. Can you please PM me your yahoo/Gtalk id so that we can chat on the same......I would have requested the same through PM, but I don;t have 5 posts here to send a PM and I don't wanna spam others threads

thanks

IP Logged

ZYGI Seasoned Member HR-ONE Posts: 757	Re: Help me building deathbox II with 12 inch driver Reply #5 - 07/22/09 at 18:01:19 Thenvk Here is the link to the DBK-212 https://www.decware.com/newsite/dbk12.htm I think your thinking it is in with the DBK-10 plans its a completely different cabinet. BobZ
Back to top	All Decware amps and sources, Turning Point Audio speakers IP Logged

thenvk Ex Member	Re: Help me building deathbox II with 12 inch driver Reply #6 - 07/22/09 at 20:12:55 Bob, thanks for sending the link... I got the PM. Shreekanth thanks so much for answering my queries through phone... I will update this thread once I am done with my DB II
Back to top	IP Logged

thenvk

Ex Member

Re: Help me building deathbox II with 12 inch driver
Reply #7 - 07/25/09 at 18:39:45

I took my sub today.. here are the specs... I wonder How it sounds...

http://www.jbl.com/car/products/product_detail.aspx?prod=GT5-10&Language=ENG&Cou...

General
Frequency Response 23Hz - 450Hz
Sensitivity 93dB
Impedance 4 Ohms
Power Handling, Peak 1100W
Power Handling, RMS 275W
VMAx 14,2mm
Mounting Depth 164mm

VAS 31.5
FS 30Hz
Qms 6.48
Qes 0.54
Qts 0.49

Thanks again to Shreekanth for helping me to pickup this

I will be building my DB 10 tomorrow... :)

IP Logged

thenvk

Ex Member

Re: Help me building deathbox II with 12 inch driver
Reply #8 - 07/26/09 at 17:28:58

I built my DB II today.. Satisfactory results already...
But the mistake I did is I made Y shape vent, instead of D shape....

I actually did not understood the marking given on the Panel D about the D vent.

Is the marking X/Y inch is the height and the Diameter respectively for the D? or does it mean something else?

some one please reply, I will modify my DBII.

thanks

IP Logged

proud_indian Seasoned Member I love YaBB 1G - SP1! Posts: 202	Re: Help me building deathbox II with 12 inch driver Reply #9 - 07/27/09 at 16:50:47 Call and remind me sometime. Adrian sent me a graph sheet paper with the cut out to size. it will help. shreekant
Back to top	Oppo, hdd,84c, pm6a, cd200, foreplay lll, zbox, bottlehead sex amp, zob, various stuff that make up two systems IP Logged

ZYGI Seasoned Member HR-ONE Posts: 757	Re: Help me building deathbox II with 12 inch driver Reply #10 - 07/28/09 at 20:47:00 Thenvk, If you are building a deathbox with the "D" shaped port you are building the 10" version, no? the 12" version has the bell shaped port. Or am I missing someting? BobZ
Back to top	All Decware amps and sources, Turning Point Audio speakers IP Logged

proud_indian Seasoned Member I love YaBB 1G - SP1! Posts: 202	Re: Help me building deathbox II with 12 inch driver Reply #11 - 07/30/09 at 03:39:58 He is building the DB 10", so he has to work on the "half moon" area 8-) shreekant
Back to top	Oppo, hdd,84c, pm6a, cd200, foreplay lll, zbox, bottlehead sex amp, zob, various stuff that make up two systems IP Logged

ZYGI Seasoned Member HR-ONE Posts: 757	Re: Help me building deathbox II with 12 inch driver Reply #12 - 07/31/09 at 13:21:29 Thanks Shreekant...I thought I was loosing it, whats new right? I was trying to post the formula but couldn't figure out how, the radius of the arc is 4" not exact but close enough. BobZ 2
Back to top	All Decware amps and sources, Turning Point Audio speakers IP Logged

Pages: 1

Forums › SUPPORT FORUMS FOR DECWARE SPEAKER PLANS › Deathbox Support Forum

‹ Previous topic | Next topic ›