This is a HT sub I call the VC1 it is short for Velocity Coupled after a design that I found a patent of in another forum.

the first thing I did was to take my existing KLH 10" 120W HT sub and add four strips of foam.

This is the foam I used. It is used to weatherproof windows and doors, but I'm using it as an airtight spacer so the woofer cone does not bump the Velocity baffle. The Velocity baffle is a thin piece of plywood that has a hole in it centered over the distcap of the woofer.

This is a sub box that was designed for a 12" polk audio or something. I can't remember, but the motor went to crap when the VC melted in two.

I added foam around the opening to seal it and also keep the Passive baffle from wrecking on the outside of the box. If I had money I would have replaced the woofer baffle the propper way.

this is what it looks like with the passive baffle in place on the passive enclosure.
You can't see the passive radiator in the back, yes this uses both a passive radiator and a slot port and is extremely efficient.
The tape is covering a tightly rolled piece of paper and holding it in place. The paper sharpens the inside edge of the hole as I don't have the proper tools to cut it at a 53 degree angle. It works anyway, but probably not as well as if I had all the tools.

this is the outside of the bed. This is all underneath a thick wooden top with a mattress on it. the mattress is removed right now until I can install the other hydraulic.
BTW this is inside the bedroom of my new 5th wheel trailer that I will be living in until I finish school. I'm going to have a degree in computer engineering when I'm done. YAY!!

this is a better shot of it.
The top is made from a nice piece of baltic birch 1/4" thick that accidentally got cut the wrong dimension. I couldn't find a use for it as a sub box cause it's just too thin, and the birtch is paper thin on the outsides of the cheapest plywood I've ever seen. looks nice as a bed though...
EDIT::: Sorry, but the pictures don't work anymore.
this is the link for the album if it does not show up in here.
I'm going to save this now in order not to loose it.