i belive it will do up to 5khz not full range.... that what the plan's says i all so belive its said thats best for home audio

one more thing u should check out befor building is will your speakers even do fullrange??? more then likely not.
u would probly be better off doing up to say 500hz then letting a pair of mid/high's take over.

this is what im going to be doing. for my home system
running 4 10's ( 2 per side ) tuned up to 500 then let my 3(per side) x 4.5 kappa's take over from 500hz..

now what do i got to do to make this box able to do 500hz..
im lost with tuning anyone?

[quote author=breisch1986  link=1147672961/0#2 date=1147742602]thanks phd5000 . I guess I'll have to break out the old Alpine SPS-693 6x9s. Not a bad set of speakers with decent volume in my sentra. I just wanted to try a unique approach. Your plan also sounds appealing, let me know how it turns out. [/quote]

i will do
right now im looking for the 10's that fit the specs of the box & handle the power i have i have a 1100 rms x 1  @ 4ohms or 800rms x 2 @ 2 ohms ...
so far i have blowen every woofer that this amp comes across
& i dont mean cheap ones either...

a earthquake subzero 12" ( 1200 rms so said)
a mephis elvis 12"
2 x 10 jlw3 ( first bass note poped one coil)

thanks J-rock, this input is really helping me, however, I'm still interested in the fullrange version.(plus I'm stubborn) So, I think I will make the throat pieces removable for toying with till I find what I like. Also can anybody recommened a good but cheap and effecient full-range 10? Also, I'm not quite sure what steve means by rotating the baffle 180 degrees. I realize I'm gonna get about 5K hz with a 3" throat, I just wanna try it. ???

nope.  

I lost my password for awhile and recently found it.  I plan on implementing the diagram to see how it sounds within 2 weeks from now though.

If you go the 2 WO route then, with one being the higher woderange, I would try this driver:

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=264-332

Otherwise for fullrange including sub duty, (a single WO in other words) you are going to spend big bucks trying to find a decent 10 to go low and high.  2500Hz is about the limit of most tens that go down to 40Hz.

Also, when steve talks about rotating the baffle 180 to increase HF production, I believe he means to flip the baffles so the cone points to the throat.  It could mean however so that the baffles angle towards the throat themselves.  Picture:



*Notice*  This last picture is pure speculation by myself.  It very well could be what steve meant, however it could just as easily by nothing like what steve meant.