Hello, I'm going to be making my second WO 36x36x14 (pannels) for a pair of 12" Kove Armaggedon Z's I just picked up.

The T/S specs I have and ran on WINisd came up at .4 for the sealed section. And that seems a bit small to me.

If anyone could run these through any program you might have I would really appreciate it. Any comments would be great too. I think the fairly low inductance, kinda high sens and decent xmax, should have this thing pounding.

Power is already taken care of at 2500wrms at 4ohm

Thanks,
*Power Handling: 800 watts RMS *VCdia: 3" *Le: 2.5 mH *Nominal impedance: 4 ohms per coil *Re: 3.0 ohms *Frequency response: 20-300 Hz. *Magnet weight: 192 oz. *Fs: 34 Hz *SPL: 90 dB 2.83V/1m *Vas: 1.2 cu. ft. *Qms: 5.33 *Qes: .39 *Qts: .36 *Xmax: 18 mm

I got .40 cubic feet for sealed chamber in optimum 4th order BP also.

I ran the measurement in unibox program and it shows a .7 ft3 and 1.3 ft3
1 is optimum and the other is for lowend