Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> Deathbox Support Forum >> whats the best design for.... https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1185494806 Message started by breakjunki on 07/27/07 at 01:06:46 |
Title: whats the best design for.... Post by breakjunki on 07/27/07 at 01:06:46 hey guys.. Ok. I have a 12" bravox edx 12" 4 ohm dvc. It will rms at 2000+ daily. I have a orion xtr pro 2400 its 2400 rms @ 2 ohms. Its a monster sub. My question is what box design would you suggest for this single 12" sub. I have plenty of room. I want something geared more towards sql rather than all out spl. A high output daily driver. Usually I'd just do about 3 ft3 slot tuned at 33-35. But want to try something different.. any suggestions??? thanks, Joe |
Title: Re: whats the best design for.... Post by 60_and_up on 07/27/07 at 03:47:01 death box ll, go to the speaker page on this forum and look for the death box (12 inch version) very high quality bass, as loud as you want. https://www.decware.com/newsite/mainmenu.htm |
Title: Re: whats the best design for.... Post by Gexter on 07/28/07 at 15:00:52 I have built them all. along with basic boxes and boxes of my own design. Presently I am using a DB12 in my suburban. I have had a WO/WO32/DB10/sealed and ported boxes in there. As big as the DB12 is it takes up the least room for me and provides the best sound. I have begun to like the DB12 over the others in sound SQ. My DB is carpeted inside and also has some dacron fill. In my burb the DB12 is a definite winner. The 12" WO32 was pretty cool but way too big. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |