Forums https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> TORII MK5 >> How To Connect Amplifier To A Subwoofer? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1709201173 Message started by prtuc2 on 02/29/24 at 10:06:13

Title: How To Connect Amplifier To A Subwoofer? Post by prtuc2 on 02/29/24 at 10:06:13 Hi Everyone, This is my first time using a dedicated subwoofer to an amplifier without a LFE connection. I just wanted to know how to connect the subwoofer to the Tori ii MK5 to a Martin Logan Dynamo 800X subwoofer. On the MK5, I connected the red connector to the positive and black connector to negative in each side of the amp. But in the manual for the Martin Logan shows only 1 wire to each channel. Do I connect to the positive or negative side?

Title: Re: How To Connect Amplifier To A Subwoofer? Post by will on 03/30/24 at 21:22:26 Hey prtuc2. This would be confusing to me too, the type of line level connections I have used being RCA jacks with a signal and ground for each channel. But your MKV output is speaker level, not line. So I think you want to just hook the sub up as you usually would to speakers... another set of cables coming off the Torii speaker terminals, one going to the speakers, and one to the sub for each channel. The sub diagram shows these speaker level input connections as usual, plus and minus for each side. Hope this helps, Will

Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.