Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> ZROCK2 >> ZROCK and tape loop monitor
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1695450745

Message started by Nuno on 09/23/23 at 07:32:25

Title: ZROCK and tape loop monitor
Post by Nuno on 09/23/23 at 07:32:25

Hi all

Did anyone try to connect the ZROCK to the tape loop monitor of a Preamp?

probably I'm doing something wrong, or maybe this is normal. I connected my ZROCK to the Send/return tape monitor of my preamp. As I turn the knob closer to the max it starts distorting / clipping.
Is it that the voltage output of the ZROCK that is too high?

Thx
Regards, Nuno

Title: Re: ZROCK and tape loop monitor
Post by Nuno on 10/22/23 at 12:43:20

Hi all

no one ever tried the ZROCK2 in tape loop that could share their experience?

Thx
Nuno

Title: Re: ZROCK and tape loop monitor
Post by Yakatak on 10/23/23 at 18:15:34

If the "knob" you're referring to is the one on the ZRock, then likely, yes. Your preamp is probably expecting not much more than 2 volts from a tape source.