Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> Member's Systems Picture Gallery >> 3D speakerbox
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1683333990

Message started by HellionDarklord on 05/06/23 at 01:46:30

Title: 3D speakerbox
Post by HellionDarklord on 05/06/23 at 01:46:30

Hellion THunder rendered in a x-ray 3d image... My SOcial worker (I'm disabled) says I can't spend any more money. I don't know what to do!!! Maybe I should turn this over to the Community that is Decware??? I put a grid over my latest design. The SKar VD-8 eight inch drivers are centered on the red lines. Yhe yellow is the resonator volume.

Title: Re: 3D speakerbox
Post by HellionDarklord on 05/06/23 at 01:54:09

Some good reading. YOu are not going to be able to build the box without This
https://patentimages.storage.googleapis.com/7d/43/05/8700aabd258b78/GB2037534A.pdf

Read up on the WO32 (Wicked One 32) and the WO (Wicked One)

Title: Re: 3D speakerbox
Post by HellionDarklord on 05/07/23 at 02:11:24

G-d (God without a zero written in his name the way the Jewish do) changed the speaker box for me. It looks AMAZING!!! God told me to call it Infra-Bass Thunder. i told G-d that The only thing I really wanted was to be close to Him and for Him to never leave.

He prompted this change. It takes a 6 inch Bose Acoustimass 10 replacement driver I got for $20 and two SKar vd-8 ($67.00 each) and should work more like an actual horn than the WO32. I'm wanting one to be built for my Church congregation for their Public Address speakers. I want to play bass guitar for the Messianic church.

kristen bell smileys

Title: Re: 3D speakerbox
Post by HellionDarklord on 05/07/23 at 03:09:29

3D Images of the revised Infra-Bass Thunder (GOd told me to change the name so that we can use it in my church services music. I want to learn to play bass guitar for my church people. It might be truly Infra-Sound Capable!

I couldn't get this to post new images .... Finally I put everything into one picture and here it is.

Title: Re: 3D speakerbox
Post by 4krow on 05/07/23 at 17:10:30

So, I am thinking that someone in that church would be able to lend a hand in the build if you ask.

Title: Re: 3D speakerbox
Post by HellionDarklord on 05/07/23 at 22:24:41

I might have a church involved. There once was a carpenter who did work for a Rabbi (Messianic Jewish) I hope he can build these speaker boxes. I still need amps and don't know what to get. I have four Skar VD-8 4 OHM drivers; two in an enclosure for the church and two Skar VD-8 D4 to display for Car Toys to see if we can do some trading. I want all the proceeds from Car Toys to go to the Church. I don't know what to do with the 6x9 drivers I bought. Does anybody want some Rockville RV 69 A4?

Any advice on the amps? These Skar VD-8 D4 are 6oowattsMax and 400Watts RMS 4OHM. They are dual voicecoil drivers and there are two per speaker box.

Title: Re: 3D speakerbox
Post by HellionDarklord on 05/07/23 at 23:35:25

Here is a 3D model of the speaker box.

https://skfb.ly/oGRXr

Title: Re: 3D speakerbox
Post by HellionDarklord on 05/12/23 at 19:25:43

revised version I realizes that I needed to have wood 1/2 inch thick and my previous model didn't have anything close to that. I started all over again

https://skfb.ly/oGZPN

Title: Re: 3D speakerbox
Post by HellionDarklord on 06/10/23 at 02:46:33

Finally got the nerve up to calculate the sealed enclosure. I tried to balance the sealed enclosure and the ported enclosure. I came up with something better... a REALLY long horn. both horns together is something like 12.4 ft. That's 6.2ft from one throat to the mouth on one side!!!

-