|
Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> D.I.Y. >> SE84 Power Supply and Dual Mono Questions https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1680206868 Message started by airborne11b on 03/30/23 at 21:07:48 |
|
Title: SE84 Power Supply and Dual Mono Questions Post by airborne11b on 03/30/23 at 21:07:48 To the collective, I have built a zen clone using the kit. I now want to build one but use the 5U4G rectifier tube. I have looked for schematics on here and other places to no avail. If anyone could supply a power supply schematic for a zen clone that would be helpful. Also, i would eventually like to turn these into monoblocks. the manual is very vague on how to do this. i understand wiring the OPT secondaries in series. i am guessing you wire or switch the inputs to L+R as well? Thanks in advance, Adam |
|
Title: Re: SE84 Power Supply and Dual Mono Questions Post by CAJames on 03/30/23 at 23:22:31 Quote:
Yes, you typically split the input with a Y cable. If you look on page 17 of the UFO manual: https://www.decwareproducts.com/_files/ugd/f1f204_e1b8a7c7f5f74930ae24a5c7b28d1007.pdf It has a description of how to rig for mono, both single ended and balanced. |
|
Title: Re: SE84 Power Supply and Dual Mono Questions Post by airborne11b on 03/31/23 at 15:25:45 I should have known to look into the product manual, doh [smiley=simp48.gif]. Thank you for this! |
|
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |