Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> Classifieds >> WTB: ZBit
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1676690337

Message started by effluviography on 02/18/23 at 03:18:57

Title: WTB: ZBit
Post by effluviography on 02/18/23 at 03:18:57

I'm in the market for a used Zbit. If you have one laying about not getting much use, please let me know. Cheers - Scott

Title: Re: WTB: ZBit
Post by effluviography on 02/18/23 at 03:20:54

And a balanced Decware pair of cables too :).

Title: Re: WTB: ZBit
Post by Erich on 02/18/23 at 07:33:27

Build your own. It’s a pair of Jensen JT-11P-1 transformers and a 100ohm volume knob.

Steve posts the schematic. If you can’t solder, take the schematic to a guitar shop. I wouldn’t gather you’d have to spend $400 that way.

Title: Re: WTB: ZBit
Post by effluviography on 03/13/23 at 08:41:26

I was close once. Had two scammers contact me about their supposed Zbits. I'm still on the hunt if anyone has a used one out there.

Cheers - Scott

Title: Re: WTB: ZBit
Post by Erich on 03/14/23 at 07:00:34

Seriously, build one. It’s a dead simple circuit. Go to a local music store and offer the guitar tech $100 to wire it up.

Title: Re: WTB: ZBit
Post by effluviography on 03/15/23 at 07:05:55

Hi Erich, thanks for the suggestion. I'm not much of a DIY'er when it comes to Hifi. I'd rather wait and try to pick up one made by Decware. I just picked up a cable from Lon to try whenever I get my mits on a used Zbit.

So, if anyone is thinking of parting with one, I'll be somewhat patiently waiting. Cheers - Scott