Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Speaker stand for a single UFO amp? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1655749473 Message started by Kirk on 06/20/22 at 19:24:33 |
Title: Speaker stand for a single UFO amp? Post by Kirk on 06/20/22 at 19:24:33 I am looking for options to put a UFO amp on a stand about 3-4' high. Basically looking at studio monitor stands but the top plate has to be sized for a UFO. Curious to see what others have done either purchase or build. |
Title: Re: Speaker stand for a single UFO amp? Post by Auguie on 06/22/22 at 22:14:44 Hi Kirk, I found on Timbernation a stand, actually 2, for my SE84CS M monoblocks I purchased them as unfinished maple stands and painted them with a satin lacquer. The ones I got are 6x9 as I recall, and they fit my monos perfectly. You can get spikes to add from them or supply your own. I find they work extremely well and fill the need. Hope this helps, and good luck. Auguie |
Title: Re: Speaker stand for a single UFO amp? Post by Auguie on 06/27/22 at 15:03:46 Kirk, Correction to my previous post. The stands I purchased from TimberNation were 9 x 12, not 6 x 9 as previously stated. Sorry for the confusion. Here’s a pic of the stands. Auguie |
Title: Re: Speaker stand for a single UFO amp? Post by Kirk on 06/27/22 at 17:26:45 Thanks for the feedback. Timbernation looks like good stuff. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |