Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Connecing a 12V light to a 12V A23 Battery https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1651741848 Message started by fight on 05/05/22 at 10:10:48 |
Title: Connecing a 12V light to a 12V A23 Battery Post by fight on 05/05/22 at 10:10:48 Hey, guys! I'm wanting to connect a 12V light that is used as a side marker for trucks to an A23 12V Energizer Battery. I just want to know if I need a resistor in case the battery sends too much power to the light and how I can go about hooking this up. I'm hoping I can just attach the wire to the battery. The attachment needs to be quick and something I can go out and buy if needed in a matter of 2 days! Thanks! |
Title: Re: Connecing a 12V light to a 12V A23 Battery Post by Edsonic on 05/05/22 at 20:55:08 Hello fight, This is a forum for home audio, especially Decware audio components, but all questions and discussion of audio for the home are welcome. Your numerous posts seeking resolution of various and sundry electrical/electronic conundrums might be better served by visiting one of the many available electronics forums rather than an audio forum. Try some of the sources listed here; https://blog.feedspot.com/electronics_forums/ These forums have answers to any practical question concerning almost anything electrical or electronic. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |