Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
SUPPORT FORUMS FOR DECWARE SPEAKER PLANS >> WO32 Support Forum >> Wiring the Two Drivers (SVC)
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1647651958

Message started by Chuck on 03/19/22 at 02:05:58

Title: Wiring the Two Drivers (SVC)
Post by Chuck on 03/19/22 at 02:05:58

Not being an audio or electronics kinda guy, I'm asking for a bit of help on how the two drivers in the WO-32 should be wired together. I'm going to be using single voice coil (SVC) style drivers, either 4 ohm or 8 ohm -- not yet decided which ones just yet. If I choose a pair of 8 ohm SVC drivers, should they be wired in parallel to yield an overall 4 ohm impedance to the amp? Conversely, if I choose a pair of 4 ohm SVC drivers, should they be wired in series to yield an overall 8 ohm impedance? I will be using the Dayton-Audio SPA250 plate amp. Thanks for the help.
Chuck B