Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Matching a Sugden A21SE with Tube Tots https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1647379738 Message started by Jay73 on 03/15/22 at 22:28:56 |
Title: Matching a Sugden A21SE with Tube Tots Post by Jay73 on 03/15/22 at 22:28:56 Hello All, I have a Sugden A21SE Integrated Amp. Do you think the new Tube Tots would be a good match? I know the Tots are more for Tube Amp rated at 30 watts or less. The Sugden is Pure Class A SS at 30 watts at 8-ohm or 40 watts at 4-ohms. I believe the Tots are 4-ohms when using the tie rods. Any feedback on this combination? |
Title: Re: Matching a Sugden A21SE with Tube Tots Post by Steve Deckert on 03/16/22 at 04:45:02 Hi Jay, I should be a good combination. The predicted higher damping of the amp will probably let you take them to a bit higher volumes than the tube amp, but at the same time have a stiffer speed limit if you know what I mean so as long as you don't get reckless it should be a rather great pairing. Steve |
Title: Re: Matching a Sugden A21SE with Tube Tots Post by Jay73 on 03/16/22 at 17:15:08 Hello Steve, Thank You for chimming in and providing your recommendation. Can I ask, is there a long wait time right now for these speakers? Also, which speaker stands do you recommend? Thanks Jay |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |