Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> SE84UFO2 >> question about hi/low impedance switch https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1643911227 Message started by grfdrums on 02/03/22 at 18:00:27 |
Title: question about hi/low impedance switch Post by grfdrums on 02/03/22 at 18:00:27 Hello, Somewhere I read that with the hi/lo impedance switches on this amp, one position is for 2-6 ohm speakers, and the other is for 6-16 ohm speakers. The switches toggle from 'front to back'. Can anyone tell me which position is which? My speakers are 8 ohms. Thanks, Gunnar |
Title: Re: question about hi/low impedance switch Post by Lin on 02/03/22 at 18:41:46 From the owners manual: "There is a HI / LO switch next to each pair of speaker jacks on the amplifier. This is used to match the amplifier to a given loudspeaker load. It is operated while music is playing and selected by ear for the best sound. The amplifier will work fine with the HI / LO switch in either position regardless of speaker load, however each setting will make your speaker sound different or perform differently. Choose the setting that you like the best and revisit the setting often to make sure you didn’t just choose one position over the other because it sounded better with the particular recording you were listening to when you made the choice." |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |