Forums https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 1 Support forum >> white/blue leads from Edcor go nowhere? https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1642993916 Message started by one6180339 on 01/24/22 at 03:11:56

Title: white/blue leads from Edcor go nowhere? Post by one6180339 on 01/24/22 at 03:11:56 Looking at the board, the connection points for the white/blue leads do not appear connected to anything. Holding the board up to a light I see no traces from those points. What is the point of connecting those wires?

Title: Re: white/blue leads from Edcor go nowhere? Post by BWC54 on 01/24/22 at 12:40:06 No point other than connecting them there guarantees they will not touch anything and short out. You can just as well cut the end off of them, put a piece of shrink wrap on them, and tie them up for future possible use in converting from triode mode to ultralinear.

Title: Re: white/blue leads from Edcor go nowhere? Post by one6180339 on 01/24/22 at 23:00:09 Thanks for the feedback. I think I'll wrap them and then tuck them under the transformers just in case a need for them arises.

Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.