Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl SUPPORT FORUMS FOR ZKITS >> ZKIT 1 Support forum >> Jumper added on Rev 12 2018 board https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1639840345 Message started by BWC54 on 12/18/21 at 15:12:25 |
Title: Jumper added on Rev 12 2018 board Post by BWC54 on 12/18/21 at 15:12:25 I just received my ZKIT1 board revision 12 2018. In addition to jumpers J1 through J6 it looks like it needs another jumper under one of the 3.3 uf 400V capacitors to connect from the power supply to the red leads of the output transformers. There's a place for it but it's unmarked on the board. Is this correct? I saw no mention of it anywhere. |
Title: Re: Jumper added on Rev 12 2018 board Post by BWC54 on 12/18/21 at 15:48:50 Never mind. No jumper is required there. The board itself is jumpered there. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |