Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> Digital >> SPI Clock Pin No Output https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1637294224 Message started by fight on 11/19/21 at 03:57:04 |
Title: SPI Clock Pin No Output Post by fight on 11/19/21 at 03:57:04 I am using STM32F103CBT7 for my design with HAL functions at a 72MHz system clock. SPI 1 is configurated as Master, 16-bit data width at 18 MBits/s. When sending data out, there is a data bit on the MOSI pin, but there is no Clock pulse on the SCK pin. I can't figure out what is wrong. Any suggestion? I've read some tutorials like https://www.kynix.com/components/STM32F103CBT7-Microcontroller-CAD-Models-Datasheet-Features.html, but I still have no idea. Thanks. |
Title: Re: SPI Clock Pin No Output Post by CAJames on 11/19/21 at 16:07:46 Are the clock and data output at the same voltage and frequency? |
Title: Re: SPI Clock Pin No Output Post by fight on 11/20/21 at 01:55:29 Yes, they are the same. |
Title: Re: SPI Clock Pin No Output Post by CAJames on 11/20/21 at 14:07:52 It's been many years since I messed with ICs (as we called them when I was in school) but that sounds like a bad chip to me. Unless of course you need another signal to enable the clock out. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |