Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> TORII JR >> Output tube matching question
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1631749339

Message started by derekinla on 09/16/21 at 00:42:19

Title: Output tube matching question
Post by derekinla on 09/16/21 at 00:42:19

For Torri Jr V2, had question about where to put matched pairs for the output tubes. I know that the amp will be shipped with a matched set of EL34 quads but when replacing tubes, wanted to know where a matched pair would be grouped. I presume matched pairs should be grouped together within each channel (one matched pair for the right channel, one matched pair for the left). Or are the matched pairs split up R and L (one in each channel) but matched in the corresponding position (bottom position left to bottom position right and top position left matched to top position right)?

Title: Re: Output tube matching question
Post by Lin on 09/16/21 at 04:54:07

Matched pairs on each channel (R&L), the 2 tubes (per channel) work with each other in a push pull arrangement.

Title: Re: Output tube matching question
Post by derekinla on 09/16/21 at 05:52:20

[smiley=icqlite20.png]got it... that's what I thought...