Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Using 2 Zen Triode integrated amps https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1631590818 Message started by Paqua on 09/14/21 at 04:40:18 |
Title: Using 2 Zen Triode integrated amps Post by Paqua on 09/14/21 at 04:40:18 New audio guy here. If you buy 2 of these 1 for each speaker how would you do that? Do you need a pre-amp to run all the inputs etc? Id like to run these with Cornwall IVs or Tekton Perfect SET 15s. Any help would appreciated |
Title: Re: Using 2 Zen Triode integrated amps Post by Paqua on 09/14/21 at 06:06:02 ok ill go see if i can find where that is |
Title: Re: Using 2 Zen Triode integrated amps Post by Paqua on 09/14/21 at 06:14:22 Ok page 17 was warranty info however early on in the manual it talks about bridging. By connecting left positive to right negative. However it says nothing how to operate the amp. Where to plug in the external equipment like a dac or turntable amp. Which unit would be the volume control? |
Title: Re: Using 2 Zen Triode integrated amps Post by Lin on 09/14/21 at 17:48:14 https://www.decware.com/newsite/SE84CKC.html If you go to the link above and scroll down to the link to download the manual you will find instructions (page 17) on how to use them as mono amps. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |