Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> SE84UFO >> Switch Selection for Speakers
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1612351247

Message started by jcmusic on 02/03/21 at 11:20:47

Title: Switch Selection for Speakers
Post by jcmusic on 02/03/21 at 11:20:47

Ok so you have two switches are the two switches suppose to be in the same position creating two different sounds, or can they be in different positions creating four different sounds?

Title: Re: Switch Selection for Speakers
Post by Lon on 02/03/21 at 13:28:13

I would use both switches in the same position . . . that way each speaker is fed the same "signal" . . . .

Title: Re: Switch Selection for Speakers
Post by CAJames on 02/03/21 at 15:04:58

There is certainly no harm in having the switches in different positions but I agree with Lon that it makes sense to choose one or the other. I'll say however in my system (that can resolve significant differences between fuses and cables) I hear no difference changing the impedance switch.

Title: Re: Switch Selection for Speakers
Post by Lin on 02/03/21 at 16:40:32

Do you use the amp to drive just the tweeters?

Title: Re: Switch Selection for Speakers
Post by jcmusic on 02/03/21 at 23:22:33

No I use the amp to drive just the mid drivers. I do hear a difference when I switch them and I thought the same that both should be in the same position, I just wanted to be sure thanks guys...