Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
Audio Forums >> Frequently Asked Questions >> Decware Amp feet
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1606752341

Message started by mperdue63 on 11/30/20 at 16:05:41

Title: Decware Amp feet
Post by mperdue63 on 11/30/20 at 16:05:41

Bob Z. has made a set of custom bases for my Decware Amps. They look really really great! I need to supply the feet for the new bases. Does anyone one know what Decware uses for their amp feet? What size? Many thanks for the help.

Title: Re: Decware Amp feet
Post by DPC on 11/30/20 at 20:15:48

Call Sarah at Decware and I'll bet she can fix you up real fast.

Title: Re: Decware Amp feet
Post by GroovySauce on 11/30/20 at 20:16:37

I would look at the Herbies Audio Lab Tenderfoot with adhesive.

https://herbiesaudiolab.com/collections/component-isolation/products/tenderfoot?variant=12643255386167

You could get away with 3 or 4 to make sure it's really solid.

I use the Tenderfoot (tenderfeet?) under my CSP3. I like what they do to the sound.

If that's a little too much to spend you can get any rubber bumper pads or rubber feet for a few bucks.

Title: Re: Decware Amp feet
Post by mperdue63 on 12/01/20 at 03:27:48

Thanks Guys. Good counsel as usual. I found a set of sixteen on amazon that has good reviews, I'll try them on for size. The Tenders were my first choice but I need 20 and I thought I'd try something a little less expensive to start. I'll give Sarah a call if these don't fit/work. Thanks again for the advice.

Title: Re: Decware Amp feet
Post by GroovySauce on 12/01/20 at 14:22:28

20 of them would add up quickly! I when the time comes might want to try 1 set of them see if you like what happens.

Please post photos of the custom bases when when you get them.

Title: Re: Decware Amp feet
Post by mperdue63 on 12/01/20 at 14:37:20

Thanks GroovySauce,
The bases are being delivered today. I dropped off a few walnut boards that were cut and milled on the same day JFK was assassinated (57 years or so ago) at Bob Z's shop. He used the wood to make walnut bases for my ZMA, CSP3, Taboo4, ZP3 and a 25th Annv. amp that is in the que. Heck of a nice guy and certainly a valued member of the Decware family. I'll load some pics soon. Happy Holidays.

Title: Re: Decware Amp feet
Post by mperdue63 on 12/04/20 at 16:20:42

This is the new walnut base built by Bob Z. for my office Taboo. It is built like the 25th Anv. amp base. Looks great with the walnut tiny radials on my desk. The new base makes everything sound better! ;)

" alt="" border="0" />

Title: Re: Decware Amp feet
Post by GroovySauce on 12/04/20 at 19:39:15

I love the look. Make's it look even more luxurious!