Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
AUDIO FORUMS >> Classifieds >> FS: (2) Edcor XPWR 107-120 for ZKIT
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1563052796

Message started by archeion on 07/13/19 at 22:19:56

Title: FS: (2) Edcor XPWR 107-120 for ZKIT
Post by archeion on 07/13/19 at 22:19:56

I have 2 EDCOR XPWR107-120 which can be used to build a ZKIT.
I purchased these with the intent to build 2 ZKITs but eventually went full point to point and tube rectified, so I didn't use these. They are new in original boxes. I also have an extra set of end bells I will throw in free.
Photos:
https://photos.app.goo.gl/AfCpKDhYCddxs8is9
https://photos.app.goo.gl/jR99seVyRjAq2MK78

Avoid the 8 week build time on these and save money!
$65 ea. shipped CONUS or $120 for both.

Manufacturer specs here:
Primary (input) Voltage 120Vrms or 240Vrms, 50/60Hz.
Secondary (output) Voltage 600V(300-0-300)@150mA & 6.3V@4A
Bobbin Material Nylon 6/6 GF-30
Flamability Rating Class B 130°C
Core Material M-6 29 ga. grain oriented lamination steel
Secondary Insulation (transformer) Clear air dry polyester varnish
Termination UL1015, 18 ga. lead wire
Mounting Powder coated steel end bells
Color RAL 5010 Gentian Blue
Weight 6.75 lbs.
Compliance RoHS & REACH

Title: Re: FS: (2) Edcor XPWR 107-120 for ZKIT
Post by JohnnyV on 12/17/21 at 00:22:40

Im assuming these have been sold?
If not, I would take both.

Title: Re: FS: (2) Edcor XPWR 107-120 for ZKIT
Post by JohnnyV on 12/17/21 at 00:27:36

Im assuming these have been sold?
If not, I would take both.