Forums - Print Page

Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl
EQUIPMENT FORUMS >> ZP3 / ZMC1,2,3 >> Rolling Rectifiers on the ZP3
https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1555963048

Message started by RjBU on 04/22/19 at 20:57:25

Title: Rolling Rectifiers on the ZP3
Post by RjBU on 04/22/19 at 20:57:25

Long time lurker, first-time poster. I was lucky enough to get a SE84UFO25 and a ZP3 w. full 25th mods for X-Mas this year and have a had a blast living with both thus far.

That said I have stuck my toe into rectifier rolling and I was curious if it is safe to use a Type 80 globe/balloon with the ZP3? I know that it is alright with the amp but I have seen much in the way of "rec"-rolling with the ZP3.

Any thoughts would be warmly welcomed!!

Title: Re: Rolling Rectifiers on the ZP3
Post by RjBU on 04/22/19 at 21:43:46

For all those who might be curious, here is an under the hood shot w. full mods. Enjoy!

Title: Re: Rolling Rectifiers on the ZP3
Post by Lon on 04/22/19 at 22:09:44

I sold my ZP3 before I could tube roll a Type 80 within it, but I'm 99.9 percent sure that it won't be any problem at all for the component. . . .

Title: Re: Rolling Rectifiers on the ZP3
Post by Archie on 04/23/19 at 00:17:51

I've been running a type 80 in both my ZP3 and CSP3 for over a year. No issues.

Title: Re: Rolling Rectifiers on the ZP3
Post by RjBU on 04/23/19 at 21:27:08

Thanks Gents!