Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> General Discussion and Support >> Question about Decware Zen84 kit 1k Watt resistors https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1551727740 Message started by andrewbutton on 03/04/19 at 19:29:00 |
Title: Question about Decware Zen84 kit 1k Watt resistors Post by andrewbutton on 03/04/19 at 19:29:00 I bought the Zen84 kit. The instructions stated to get 1/2 1K resistors, there are 4. The board I put together last night states the 1k resistors should be 2watt, says right on the board. The resistors I have from Vishay, taken from the specs for the unit look awfully small. It would seem there is not a 1k/2watt resistor that is of the right form factor. Does anybody have a source or number for a 1k 2 watt resistor, or should I just the use the half watt 1k resistor even though the board states 2 watts ? HELP ! |
Title: Re: Question about Decware Zen84 kit 1k Watt resistors Post by Keith on 03/04/19 at 19:43:57 Parts Connection sells the Audio Note non magnetic 2 watt 1k resistors |
Title: Re: Question about Decware Zen84 kit 1k Watt resistors Post by Steve Deckert on 03/05/19 at 02:31:17 The 1K 1/2 watt resistors (2) are the control grid resistors for the input tube. The other 1K 1/2 watt resistors (2) are the control grid resistors for the output tubes. The third pair of 1K resistors are 2 watt and are the plate to screen-grid resistors for each output tube. These must be 2 watt or they will fail. They will fail by design if there is a catastrophic tube short. Steve |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |