Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl AUDIO FORUMS >> D.I.Y. >> Speaker Tips and W130S8ohm https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1536467736 Message started by THEODORE on 09/09/18 at 05:35:36 |
Title: Speaker Tips and W130S8ohm Post by THEODORE on 09/09/18 at 05:35:36 Steve hi I find the'' speaker tip'' paper very helpfull and i thought why not trying some of the tips modifing a Visaton W130s 8ohm driver to ged rid of the 2 nasty peaks at 4khz and 6.8khz. So i completely removed the dust cup and i replaced it with a home- made wooden phase-plug. The 4khz peak completely went away but the 6.8khz peak still persists. What can i do to get rid of the 6.8khz peak? Theodoros Paschos Preveza -Hellas |
Title: Re: Speaker Tips and W130S8ohm Post by 4krow on 09/11/18 at 01:50:06 I am wondering if the shape of the phase plug may help with the issue. |
Title: Re: Speaker Tips and W130S8ohm Post by THEODORE on 09/11/18 at 05:02:29 Removing the phase-plug makes no difference to 6.8khz peak so it has not to do with the shape of the phase -plug. The wavelength of 6.8khz is shorter compared to 4khz peak so if the problem with 4khz peak was the dust -cup then the origin of the 6.8khz peak should be something between the voice-coil and the dust-cup. The only i can think is the voice-coil former that protrudes of the cone by 3-4mm. The problem is that is not easy to trim the voice-coil former ''as Steve Ssuggests because of the wires of the voice-coil that are glued at the top edge of the voice-coil former. Probably Steve with his experience could help. Thanks for the help |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |