Forums
https://www.decware.com/cgi-bin/yabb22/YaBB.pl EQUIPMENT FORUMS >> SE84UFO >> Hi/Lo switch https://www.decware.com/cgi-bin/yabb22/YaBB.pl?num=1530314712 Message started by Geno on 06/30/18 at 00:25:12 |
Title: Hi/Lo switch Post by Geno on 06/30/18 at 00:25:12 What exactly is the function of the Hi/Lo switch? I have Decware Monoliths and switching this has no effect that I can hear. |
Title: Re: Hi/Lo switch Post by Acetone on 06/30/18 at 01:23:39 Gino, From the SE84UFO manual. This amplifier can operate speakers as low as 2 ohms, and as high as 16 ohms and everything in-between. No harm can come to the amplifier if the speaker jacks are shorted together. There is a HI / LO switch next to each pair of speaker jacks on the amplifier. This is used to match the amplifier to a given loudspeaker load. It is operated while music is playing and selected by ear for the best sound. The amplifier will work fine with the HI / LO switch in either posi>on regardless of speaker load, however each sehng will make your speaker sound different or perform differently. |
Title: Re: Hi/Lo switch Post by Geno on 06/30/18 at 03:14:28 Hey Ace. I read that in the manual earlier. There is no difference in sound at all when switching. |
Forums » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |